Metabo SB 18 602245560 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original Instructions

We, being solely responsible: Hereby declare that 

these cordless drills/screwdrivers and impact drills, 

identified by type and serial number *1), meet all 

relevant requirements of directives *2) and 

standards *3). Technical documents for *4) - see 

page 3.

The drills and impact drills are suitable for drilling in 

metal, wood, plastic and similar materials, and also 

for screw driving and thread tapping.
The impact drills are also suited for drilling in 

masonry, brickwork and stone.
The user bears sole responsibility for any damage 

caused by inappropriate use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your power tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 

shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 

documents.

Wear ear protectors with impact drills 

(machines with the designation SB). 

Exposure 

to noise can cause hearing loss.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring.

 A cutting accessory contacting a "live" wire 

may make exposed metal parts of the power tool 

"live" and could give the operator an electric shock.
Ensure that the place where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

check using a metal detector).

A slightly acidic, flammable fluid may leak 

from defective Li-ion battery packs!
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out and 

comes into contact with your eyes, wash them with 

clean water and seek medical attention 

immediately!

Protect battery packs from water and 

moisture!

Do not use faulty or deformed battery packs!

Do not expose battery packs to fire!

Do not open battery packs!
Do not touch contacts or short-circuit battery packs!
If the machine is defective, remove the battery pack 

from the machine.
Remove the battery pack from the machine before 

any adjustment or maintenance is carried out.
Before fitting the battery pack, make sure that the 

machine is switched off.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 

machine at a standstill.
Secure the workpiece to prevent slipping or rotation 

(e.g. by securing with screw clamps).
LED lights (10): Do not observe the LED radiation 

directly with optical instruments.

Reducing dust exposure:

Some of the particles generated using this 

power tool may contain substances known to 

cause cancer, allergic reactions, respiratory 

diseases, birth defects or other reproductive harm. 

Some examples of these substances are: lead 

(from lead-based paints), crystalline silica (from 

bricks cement, etc.), additives for wood treatment 

(chromate, wood preservative), some types of 

wood (like oak and beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a 

well ventilated area and wear protective equipment, 

such as dust masks that are specially designed to 

filter out microscopic particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions