Metabo RW 18 LTX 120 601163660 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

Original Instructions

We, being solely responsible: Hereby declare that 

these stirrers, identified by type and serial number 

*1), meet all relevant requirements of directives *2) 

and standards *3). Technical documents for *4) - 

see page 3.

The stirrer is intended for stirring of powdery 

building materials such as mortar, plaster, adhesive 

as well as solvent-free paints, lacquer and similar 

substances.
Do not use for drilling.
The user bears sole responsibility for any damage 

caused by inappropriate use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your power tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 

shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 

documents.

Always hold the machine with both hands on 

the intended handles, take a secure stance and 

concentrate on the work.

 Loss of control can 

cause personal injury.

Hold the power tool by the insulated gripping 

surfaces when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed metal 

parts of the power tool "live" and could give the 

operator an electric shock.
Observe the maximum permitted agitator paddle 

diameter (see technical data).
There will be reverse torque at the handle. Always 

hold the machine with both hands on the intended 

handles, take a secure stance and concentrate on 

the work.
Secure the stirring container against turning.

Always wear protective goggles, gloves, and a 

breathing mask when working with the machine.
Wear ear protectors when working for long periods 

of time. High noise levels over a prolonged period of 

time may affect your hearing.
Keep hands away from the rotating tool!
Do not mix solvents or materials containing solvents 

with a flashpoint below 21°C. Hazardous vapours or 

explosive mixtures may form during processing.

Reducing dust exposure:

Some of the particles generated using this 

power tool may contain substances known to 

cause cancer, allergic reactions, respiratory 

diseases, birth defects or other reproductive harm. 

Some of these substances include: Lead (in paint 

containing lead), mineral dust (from bricks, 

concrete etc.), additives used for wood treatment 

(chromate, wood preservatives), some wood types 

(such as oak or beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

Do the following to reduce exposure to these 

substances: Ensure good ventilation of the 

workplace and wear appropriate protective 

equipment, such as respirators able to filter 

microscopically small particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

4.1 Special safety instructions for mains 

powered machines:

Pull the plug out of the socket before making any 

adjustments, changing tools, maintaining or 

cleaning.
Avoid unintentional starting: Always unlock the 

trigger switch if the machine is unplugged or in the 

event of a power failure.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions