Metabo BS 14.4 LT 602100500 - Инструкция по эксплуатации - Страница 12

ENGLISH

en

11

On our own responsibility, we hereby declare that 
these battery-powered drilling screwdrivers and 
impact drills, identified by type and serial number 
*1), meet all relevant requirements of directives *2) 
and standards *3). Technical documents at *4) - 

Fig. M.

The drills and impact drills are suitable for drilling in 
metal, wood, plastic and similar materials, and also 
for screwdriving and thread tapping.
The impact drills are also suited for drilling in 
masonry, brickwork and stone.
The user bears sole responsibility for any damage 
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be 
observed.

For your own protection and for the 
protection of your power tool, pay atten-
tion to all parts of the text that are marked 
with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 
fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 
documents.

Wear ear protectors with impact drills 

(machines with the designation SB). 

Exposure 

to noise can cause hearing loss.

Hold tool by insulated gripping surfaces, when 

performing an operation where the cutting 

accessory may contact hidden wiring.

 If the 

cutting accessory contacts a "live" wire, exposed 
metal parts of the electrical tool may become "live" 
and give the operator an electric shock.
Ensure that the spot where you wish to work is free 
of 

power cables, gas lines or water pipes

 (e.g. 

by using a metal detector).

Protect battery packs from water and mois-
ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 
defective li-ion battery packs! 

If battery fluid leaks out and comes into 
contact with your skin, rinse immediately 
with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 
with clean water and seek medical attention imme-
diately.
Remove the battery pack from the machine before 
any adjustments, conversions or servicing are 
performed.
Before fitting the battery pack, make sure that the 
machine is switched off.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 
machine at a standstill.
Secure the workpiece to prevent slipping or rotation 
(e.g. by securing with screw clamps).
LED lights (11): Do not observe the LED radiation 
directly with optical instruments.

Reducing dust exposure:

Some of the particles generated using this 
power tool may contain substances known to 

cause cancer, allergic reactions, respiratory 
diseases, birth defects or other reproductive harm. 
Some examples of these substances are: lead 
(from lead-based paints), crystalline silica (from 
bricks cement, etc.), additives for wood treatment 
(chromate, wood preservative), some types of 
wood (like oak and beech dust), metals, asbestos.
The risk from exposure to such substances will 
depend on how long the user or nearby persons are 
being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a 
well ventilated area and wear protective equipment, 
such as dust masks that are specially designed to 
filter out microscopic particles.
Observe the relevant guidelines for your material, 
staff, application and place of application (e.g. 
occupational health and safety regulations, 
disposal).
Collect the generated particles at the source, avoid 
deposits in the surrounding area. 
Use suitable accessories for special work. In this 
way, fewer particles enter the environment in an 
uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 
or on dust deposits.

- Use an extraction unit and/or air purifiers.

Original instructions

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions