Metabo BE 561 601162000 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original instructions

1. Conformity Declaration

We declare under our sole responsibility: These 

impact drills / drills, identified by type and serial 

number *1), comply with all relevant requirements of 

the directives *2) and standards *3). Technical file 

at *4) - see page 3.

2. Specified Use

SBE 561, SBE 550, SBE 521, SB 561:



The impact drill is suitable for non-impact drilling in 

metal, wood, plastic and similar materials and 

impact drilling in concrete, stone and similar 

materials. 
BE 561, B 561:



The drill is suitable for non-impact drilling in metal, 

wood, plastic and similar materials. 
SBE 561, SBE 550, SBE 521, BE 561:



The impact drill is suitable for thread cutting and 

screwdriving.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

3. General Safety Instructions

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.



WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.



Pass on your electrical tool only together with these 

documents.

4. Special Safety Instructions

Always wear hearing protection when using 

hammer drills.

 Exposure to noise can cause loss 

of hearing.

Use the additional handle supplied with the 

tool.

 Loss of control can lead to injuries.

Hold the power tool by insulated gripping 

surfaces when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed 



metal parts of the power tool "live" and shock the 

operator.

Pull the plug out of the plug socket before any 

adjustments or servicing are performed.
Beware of gas/water pipes and electric cables!
Avoid inadvertent starts by always unlocking the 

switch when the plug is removed from the mains 

socket or in case of a power cut.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 

machine at standstill.
Caution must be exercised when driving screws into 

hard materials (driving screws with metric or 

imperial threads into steel)! The screw head may 

break or a high reverse torque may build up.
The machine produces powerful forces when 

seizing or catching the workpiece. Always hold the 

machine firmly, adopt a steady stance and focus on 

your work.

Secure small workpieces. For example, clamp in a 

vice.
Dust from material such as paint containing lead, 

some wood species, minerals and metal may be 

harmful. Contact with or inhalation of the dust may 

cause allergic reactions and/or respiratory diseases 

to the operator or bystanders. 



Certain kinds of dust are classified as carcinogenic 

such as oak and beech dust especially in 

conjunction with additives for wood conditioning 

(chromate, wood preservative). Material containing 

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is 



recommended.

Follow national requirements for the materials you 

want to work with.

5. Overview

See page 2.

1 Chuck key (for geared chuck) *

2 Geared  chuck  *

3 Futuro Plus keyless chuck *

4 Depth  stop  *

5 Additional handle *

6 Direction switch *

7 Sliding switch for normal drilling/impact drilling *

8 Lock button (continuous operation)

9 Trigger

10 Speed preselection wheel *

* depending on the features / model

6. Commissioning

Before plugging in, check to see that the 

rated mains voltage and mains frequency, 

as stated on the rating label, match with your 

power supply.