Makita TD111DWAE - Инструкция по эксплуатации - Страница 5

5

ENGLISH

Cordless impact driver safety 
warnings

1. 

Hold power tool by insulated gripping sur-
faces, when performing an operation where 
the fastener may contact hidden wiring.

)DVWHQHUVFRQWDFWLQJDOLYHZLUHPD\PDNH
H[SRVHGPHWDOSDUWVRIWKHSRZHUWRROOLYHDQG

could give the operator an electric shock.

2. 

$OZD\VEHVXUH\RXKDYHD¿UPIRRWLQJ

Be sure no one is below when using the tool in 
high locations.

3. 

+ROGWKHWRRO¿UPO\

4. 

Wear ear protectors.

5. 

Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely 
hot and could burn your skin.

6. 

Keep hands away from rotating parts.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace strict 
adherence to safety rules for the subject product.

MISUSE or failure to follow the safety rules stated in this 
instruction manual may cause serious personal injury.

Important safety instructions for 
battery cartridge

1. 

Before using battery cartridge, read all instructions 
and cautionary markings on (1) battery charger, (2) 
battery, and (3) product using battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 
shorter, stop operating immediately. It may 
result in a risk of overheating, possible burns 
and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them out 
with clear water and seek medical attention right 
away. It may result in loss of your eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-
ductive material.

(2) 

Avoid storing battery cartridge in a con-
tainer with other metal objects such as 
nails, coins, etc.

(3) 

Do not expose battery cartridge to water 
or rain.

A battery short can cause a large current 

ÀRZRYHUKHDWLQJSRVVLEOHEXUQVDQGHYHQD

breakdown.

6. 

Do not store the tool and battery cartridge in 
locations where the temperature may reach or 
exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 
it is severely damaged or is completely worn 

RXW7KHEDWWHU\FDUWULGJHFDQH[SORGHLQD¿UH

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject 
to the Dangerous Goods Legislation require-
ments. 

For commercial transports e.g. by third parties, for-
warding agents, special requirement on packaging and 
labeling must be observed. 
For preparation of the item being shipped, consulting an 

H[SHUWIRUKD]DUGRXVPDWHULDOLVUHTXLUHG3OHDVHDOVR

observe possibly more detailed national regulations. 

7DSHRUPDVNRIIRSHQFRQWDFWVDQGSDFNXSWKH

battery in such a manner that it cannot move 
around in the packaging.

11. 

Follow your local regulations relating to dis-
posal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 
have been altered, may result in the battery bursting 

FDXVLQJ¿UHVSHUVRQDOLQMXU\DQGGDPDJH,WZLOO

also void the Makita warranty for the Makita tool and 
charger.

Tips for maintaining maximum 
battery life

1. 

Charge the battery cartridge before completely 
discharged. Always stop tool operation and 
charge the battery cartridge when you notice 
less tool power.

2. 

Never recharge a fully charged battery cartridge. 
Overcharging shortens the battery service life.

3. 

Charge the battery cartridge with room temperature 
at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery 
cartridge cool down before charging it.

FUNCTIONAL 
DESCRIPTION

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 
before adjusting or checking function on the tool.

Installing or removing battery 
cartridge

CAUTION:

Always switch off the tool before 

installing or removing of the battery cartridge.

CAUTION:

Hold the tool and the battery car-

WULGJH¿UPO\ZKHQLQVWDOOLQJRUUHPRYLQJEDWWHU\

cartridge.

 Failure to hold the tool and the battery 

FDUWULGJH¿UPO\PD\FDXVHWKHPWRVOLSRII\RXUKDQGV

and result in damage to the tool and battery cartridge 

DQGDSHUVRQDOLQMXU\

Ź

Fig.1:

1.

 Red indicator 

2.

 Button 

3.

 Battery cartridge

7RUHPRYHWKHEDWWHU\FDUWULGJHVOLGHLWIURPWKHWRRO

while sliding the button on the front of the cartridge.

7RLQVWDOOWKHEDWWHU\FDUWULGJHDOLJQWKHWRQJXHRQWKH

battery cartridge with the groove in the housing and slip 
it into place. Insert it all the way until it locks in place 
with a little click. If you can see the red indicator on the 
upper side of the button, it is not locked completely.