Makita LXT DUT130Z - Инструкция по эксплуатации - Страница 5

5 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DUT130

DUT131

No load speed

High speed

0 - 1,300 min

-1

Low speed

0 - 350 min

-1

Maximum mixing blade diameter

165 mm

Overall length (without shaft and mixing blade)

320 mm

307 mm

Rated voltage

D.C. 18 V

Net weight

2.5 - 2.8 kg

2.7 - 3.0 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications and battery cartridge may differ from country to country.

• 

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi

-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / 

BL1840B / BL1850 / BL1850B / BL1860B

Charger

DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of 

residence.

WARNING:

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Symbols

The followings show the symbols used for the equip

-

ment. Be sure that you understand their meaning before 

use.

Read instruction manual.

Do not use the tool in the rain.

Do not clean the tool with water.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or 

battery pack together with household waste 

material!

In observance of the European Directives, 

on Waste Electric and Electronic 

Equipment and Batteries and Accumulators 

and Waste Batteries and Accumulators 

and their implementation in accordance 

with national laws, electric equipment and 

batteries and battery pack(s) that have 

reached the end of their life must be col-

lected separately and returned to an envi

-

ronmentally compatible recycling facility.

Intended use

The tool is intended for mixing wall materials, etc. 

(except flammable materials).

Noise

The typical A-weighted noise level determined accord

-

ing to EN60745-2-1:

Model DUT130

Sound pressure level (L

pA

) : 74 dB(A)

Uncertainty (K) : 3 dB(A)

Model DUT131

Sound pressure level (L

pA

) : 74 dB(A)

Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).

NOTE:

 The declared noise emission value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may 

also be used in a preliminary assessment of exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the tool is 

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such 

as the times when the tool is switched off and when 

it is running idle in addition to the trigger time).