Makita DTS141Z - Инструкция по эксплуатации - Страница 4

4 

ENH101-18 

For European countries only 

EC Declaration of Conformity 

Makita declares that the following Machine(s): 

Designation of Machine:   
Cordless Oil-Pulse Driver 
Model No./ Type: DTS131, DTS141 

Conforms to the following European Directives: 

2006/42/EC 

They are manufactured in accordance with the following 
standard or standardized documents: 

EN60745 

The technical file in accordance with 2006/42/EC is 
available from: 

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 
 

19.3.2014 

000331 

Yasushi Fukaya 

Director 

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

Save all warnings and instructions for 
future reference. 

GEB054-3 

CORDLESS IMPACT DRIVER 
SAFETY WARNINGS 

1. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock. 

2. 

Always be sure you have a firm footing. 
Be sure no one is below when using the tool 
in high locations. 

3. 

Hold the tool firmly. 

4. 

Wear ear protectors. 

5. 

Do not touch the bit or the workpiece 
immediately after operation. They may be 
extremely hot and could burn your skin. 

6. 

Keep hands away from rotating parts. 

SAVE THESE INSTRUCTIONS. 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. 
MISUSE or failure to follow the safety rules stated in this 
instruction manual may cause serious personal injury. 

ENC007-8 

IMPORTANT SAFETY 
INSTRUCTIONS 
FOR BATTERY CARTRIDGE 

1. 

Before using battery cartridge, read all instructions 
and cautionary markings on (1) battery charger, (2) 
battery, and (3) product using battery. 

2. 

Do not disassemble battery cartridge. 

3. 

If operating time has become excessively 
shorter, stop operating immediately. It may 
result in a risk of overheating, possible burns 
and even an explosion. 

4. 

If electrolyte gets into your eyes, rinse them out 
with clear water and seek medical attention right 
away. It may result in loss of your eyesight. 

5. 

Do not short the battery cartridge: 

(1) 

Do not touch the terminals with any 
conductive material. 

(2) 

Avoid storing battery cartridge in a 
container with other metal objects such 
as nails, coins, etc. 

(3) 

Do not expose battery cartridge to water 
or rain. 

A battery short can cause a large current flow, 
overheating, possible burns and even a breakdown. 

6. 

Do not store the tool and battery cartridge in 
locations where the temperature may reach or 
exceed 50

ﾟ

C (122

ﾟ

F). 

7. 

Do not incinerate the battery cartridge even if 
it is severely damaged or is completely worn 
out. The battery cartridge can explode in a fire. 

8. 

Be careful not to drop or strike battery.   

9. 

Do not use a damaged battery.   

10. 

Follow your local regulations relating to 
disposal of battery.   

SAVE THESE INSTRUCTIONS. 

Tips for maintaining maximum battery life 

1. 

Charge the battery cartridge before 
completely discharged. 
Always stop tool operation and charge the 
battery cartridge when you notice less tool power. 

2. 

Never recharge a fully charged battery cartridge. 
Overcharging shortens the battery service life. 

3. 

Charge the battery cartridge with room temperature 
at 10

ﾟ

C - 40

ﾟ

C (50

ﾟ

F - 104

ﾟ

F). Let a hot battery 

cartridge cool down before charging it. 

4. 

Charge the battery cartridge once in every six 
months if you do not use it for a long period of time.