Шуруповерты Makita DHP481RTE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. LED display
4-1. Switch trigger
5-1. Lamp
6-1. Reversing switch lever
7-1. Speed change lever
8-1. Action mode changing ring
8-2. Arrow
9-1. Adjusting ring
9-2. Graduation
9-3. Arrow
10-1. Protrusion
10-2. Arm
10-3. Groove
10-4. Grip pole
10-5. Side grip
11-1. Sleeve
12-1. Bit holder
12-2. Bit
13-1. Depth rod
13-2. Clamp screw
14-1. Groove
14-2. Hook
14-3. Screw
16-1. Blow-out bulb
SPECIFICATIONS
Model DHP481
Drilling into concrete
16 mm
Drilling into steel
13 mm
Drilling into wood
76 mm
Fastening wood screw
10 mm x 90 mm
Capacities
Fastening machine screw
6 mm
High (2)
0 - 2,100
No load speed (min
-1
)
Low (1)
0 - 550
High (2)
0 - 31,500
Blows per minute
Low (1)
0 - 8,250
Overall length
205 mm
Net weight
2.7 kg
Rated voltage
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE079-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 85 dB (A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
