Makita DF032DZ - Инструкция по эксплуатации - Страница 7

7 ENGLISH

Battery tool use and care

1. 

Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

2. 

Use power tools only with specifically desig-

nated battery packs.

 Use of any other battery 

packs may create a risk of injury and fire.

3. 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another.

 Shorting the battery termi

-

nals together may cause burns or a fire.

4. 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact acci

-

dentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help.

 Liquid ejected 

from the battery may cause irritation or burns.

Service

1. 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power 

tool is maintained.

2. 

Follow instruction for lubricating and chang

-

ing accessories.

3. 

Keep handles dry, clean and free from oil and 

grease.

Cordless driver drill safety warnings

1. 

Use auxiliary handle(s), if supplied with the 

tool.

 Loss of control can cause personal injury.

2. 

Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring.

 Cutting accessory contacting 

a "live" wire may make exposed metal parts of the power 

tool "live" and could give the operator an electric shock.

3. 

Hold power tool by insulated gripping sur

-

faces, when performing an operation where 

the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

4. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

5. 

Hold the tool firmly.

6. 

Keep hands away from rotating parts.

7. 

Do not leave the tool running. Operate the tool 

only when hand-held.

8. 

Do not touch the drill bit or the workpiece 

immediately after operation; they may be 

extremely hot and could burn your skin.

9. 

Some material contains chemicals which may 

be toxic. Take caution to prevent dust inhala

-

tion and skin contact. Follow material supplier 

safety data.

10. 

If the drill bit cannot be loosened even you 

open the jaws, use pliers to pull it out.

 In such a 

case, pulling out the drill bit by hand may result in 

injury by its sharp edge.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with 

product (gained from repeated use) replace strict adher

-

ence to safety rules for the subject product. MISUSE or 

failure to follow the safety rules stated in this instruc

-

tion manual may cause serious personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc

-

tions and cautionary markings on (1) battery char

-

ger, (2) battery, and (3) product using battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively shorter, 

stop operating immediately. It may result in a risk of 

overheating, possible burns and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them out 

with clear water and seek medical attention right 

away. It may result in loss of your eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con

-

ductive material.

(2) 

Avoid storing battery cartridge in a con

-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current flow, over-

heating, possible burns and even a breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject to 

the Dangerous Goods Legislation requirements. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack

-

aging and labeling must be observed.

For preparation of the item being shipped, consult

-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

Follow your local regulations relating to dis

-

posal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.