Makita DF0300+D-58833 - Инструкция по эксплуатации - Страница 4

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DF0300

Drilling capacities

Steel

10 mm

Wood

28 mm

Fastening capacities

Wood screw

5.1 mm x 63 mm

Machine screw

M6

No load speed (RPM)

High (2)

0 - 1,500 min

-1

Low (1)

0 - 450 min

-1

Overall length

220 mm

Net weight

1.2 kg

Safety class

/II

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

Weight according to EPTA-Procedure 01/2014

Symbols

The followings show the symbols used for the equip

-

ment. Be sure that you understand their meaning before 

use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries  

Do not dispose of electric equipment 

together with household waste material! In 

observance of the European Directive, on 

Waste Electric and Electronic Equipment 

and its implementation in accordance with 

national law, electric equipment that have 

reached the end of their life must be col

-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for drilling and screw driving in 

wood, metal and plastic.

Power supply

The tool should be connected only to a power supply of 

the same voltage as indicated on the nameplate, and 

can only be operated on single-phase AC supply. They 

are double-insulated and can, therefore, also be used 

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (L

pA

) : 80 dB(A)

Sound power level (L

WA

) : 91 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

 The declared noise emission value(s) has 

been measured in accordance with a standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared noise emission value(s) 

may also be used in a preliminary assessment of 

exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-2-1:

Work mode: drilling into metal

Vibration emission (a

h,D

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.