Makita BHP 441 RFE - Инструкция по эксплуатации - Страница 6

6

GENERAL SAFETY RULES

WARNING:
Read all instructions.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or seri-
ous injury. The term “power tool” in all of the warnings 
listed below refers to your mains-operated (corded) power 
tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

Work area safety

1. Keep work area clean and well lit.

 Cluttered and 

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable liq-
uids, gases or dust. 

Power tools create sparks which 

may ignite the dust or fumes.

3. Keep children and bystanders away while operat-

ing a power tool. 

Distractions can cause you to lose 

control.

Electrical safety

4. Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded sur-

faces such as pipes, radiators, ranges and refrig-
erators. 

There is an increased risk of electric shock if 

your body is earthed or grounded.

6. Do not expose power tools to rain or wet condi-

tions. 

Water entering a power tool will increase the 

risk of electric shock.

7. Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep 
cord away from heat, oil, sharp edges or moving 
parts. 

Damaged or entangled cords increase the risk 

of electric shock.

8. When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of a 

cord suitable for outdoor use reduces the risk of elec-
tric shock.

Personal safety

9. Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not 
use a power tool while you are tired or under the 
influence of drugs, alcohol or medication. 

A 

moment of inattention while operating power tools 
may result in serious personal injury.

10. Use safety equipment. Always wear eye protec-

tion. 

Safety equipment such as dust mask, non-skid 

safety shoes, hard hat, or hearing protection used for 
appropriate conditions will reduce personal injuries.

11. Avoid accidental starting. Ensure the switch is in 

the off-position before plugging in. 

Carrying power 

tools with your finger on the switch or plugging in 
power tools that have the switch on invites accidents.

12. Remove any adjusting key or wrench before turn-

ing the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may result 
in personal injury.

13. Do not overreach. Keep proper footing and bal-

ance at all times. 

This enables better control of the 

power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair, clothing, and gloves away 
from moving parts. 

Loose clothes, jewellery or long 

hair can be caught in moving parts.

15. If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 
are connected and properly used. 

Use of these 

devices can reduce dustrelated hazards.

Power tool use and care

16. Do not force the power tool. Use the correct power 

tool for your application. 

The correct power tool will 

do the job better and safer at the rate for which it was 
designed.

17. Do not use the power tool if the switch does not 

turn it on and off. 

Any power tool that cannot be con-

trolled with the switch is dangerous and must be 
repaired.

18. Disconnect the plug from the power source and/or 

the battery pack from the power tool before mak-
ing any adjustments, changing accessories, or 
storing power tools. 

Such preventive safety mea-

sures reduce the risk of starting the power tool acci-
dentally.

19. Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the 
power tool or these instructions to operate the 
power tool. 

Power tools are dangerous in the hands 

of untrained users.

20. Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 
any other condition that may affect the power 
tools operation. If damaged, have the power tool 
repaired before use. 

Many accidents are caused by 

poorly maintained power tools.

21. Keep cutting tools sharp and clean. 

Properly main-

tained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control.

22. Use the power tool, accessories and tool bits etc. 

in accordance with these instructions and in the 
manner intended for the particular type of power 
tool, taking into account the working conditions 
and the work to be performed. 

Use of the power tool 

for operations different from those intended could 
result in a hazardous situation.

Battery tool use and care

23. Ensure the switch is in the off position before 

inserting battery pack. 

Inserting the battery pack into 

power tools that have the switch on invites accidents.

24. Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used 
with another battery pack.