Fein ASCM 12 Q Select 71161064000 - Инструкция по эксплуатации - Страница 22

22

en

sure level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: maintain the 
tool and the accessories, keep the hands warm, organi-
sation of work patterns.

Handling hazardous dusts

For work procedures with this power tool where 
material is removed, dusts develop that can be hazard-
ous to one’s health.
Contact with or inhaling some dust types, e. g. asbestos 
and asbestos-containing materials, lead-containing coat-
ings, metal, some wood types, minerals, silicate parti-
cles from materials containing stone, paint solvents, 
wood preservatives, antifouling paints for vessels, can 
trigger allergic reactions to the operator or bystanders 
and/or lead to respiratory infections, cancer, birth 
defects or other reproductive harm. The risk from 
inhaling dusts depends on the exposition. Use dust 
extraction matched appropriately for the developing 
dust, as well as personal protective equipment and pro-
vide for good ventilation of the workplace. Leave the 
processing of asbestos-containing materials to special-
ists.
Wood and light-metal dust, hot mixtures of grinding 
dust and chemical materials can self-ignite under unfa-
vourable conditions or cause an explosion. Avoid 
sparking in the direction of the dust collector as well as 
overheating of the power tool and the materials being 
sanded, empty the dust collector/container in time, 
observe the material manufacturer’s working instruc-
tions, as well as the relevant regulations in your country 
for the materials being worked.

Operating Instructions.

Adjust the rotational direction switch and the gear 
switch only when the machine is at a complete stop.
Always push the gear switch through to the stop. Oth-
erwise, the machine can become damaged.
Thermal overload of the power tool is indicated 
through flashing of the LED in the handle.
In case of overload, the machine switches off.
To avoid accidental starting, e. g., during transport, set 
the rotation selector switch to the centre position.

Setting the torque 

The factory setting is for the small to mid-size screw 
range.

Handling the battery.

Store, operate and charge the battery only using FEIN 
battery chargers within the battery operating-tempera-
ture range between 5 °C – 45 °C (41 °F – 113 °F). At 
the beginning of the charging procedure, the battery 
temperature must be within the battery operating-tem-
perature range.

The real percentage of the battery charge condition is 
only indicated when the power tool motor is stopped.
The electronics automatically switch off the motor 
prior to the battery being deep discharged.

Repair and customer service.

When working metal under extreme oper-
ating conditions, it is possible for conductive 
dust to settle in the interior of the power 

tool. Blow out the interior of the power tool via the 
ventilation slots frequently with dry and oil-free com-
pressed air. 
Products that have come into contact with asbestos 
may not be sent in for repair. Dispose of products con-
taminated with asbestos according to the applicable 
country-specific regulations for such disposal.
The current spares parts list for this power tool can be 
found on our website at www.fein.com.

If required, you can change the following parts your-
self:

application tools, battery, belt hook, bit garage, drill 
chuck (ASCM12 (**))

Warranty and liability.

The warranty for the product is valid in accordance 
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in 
accordance with the FEIN manufacturer’s warranty dec-
laration.
The delivery scope of your power tool may include 
only a part of the accessories described or shown in this 
Instruction Manual.

Declaration of conformity.

FEIN declares itself solely responsible for this product 
conforming with the relevant provisions given on the 
last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH, C-D1_IA, 
D-73529 Schwäbisch Gmünd

Environmental protection, disposal.

Packaging, worn out power tools and accessories 
should be sorted for environmental-friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insu-
late the terminals with tape as a protective measure 
against short-circuiting.

LED indica-
tor

Meaning

Activity

1 – 4 green 
LED

Percentage of 
charge condi-
tion

Operation

Continu-
ous red 
light

Battery is 
almost empty

Charge battery

Red flash-
ing light

Battery is not 
ready for 
operation

Bring the battery into 
the battery operating-
temperature range, 
then charge

LED indica-
tor

Meaning

Activity

OBJ_BUCH-0000000366-001.book  Page 22  Monday, February 18, 2019  3:57 PM