DWT BM-400 C 5.1.8 - Инструкция по эксплуатации - Страница 10

10

English

Noise 

information

Always wear ear protection if the sound 

pressure exceed 85 dB(A).

Declaration of 

conformity

We declare under our sole responsibility that the 

product described under "Power tool specifications" is 

in  conformity  with  all  relevant  provisions  of  the 

directives  2006/42/EC  including  their  amendments 

and complies with the following standards: EN 60745-1, 

EN 60745-2-1.

Managing director                                           V.Kobzar

Merit Link International AG

Switzerland

Stabio, 09.09.2015

General

safety recommendations 

CAUTION! Make sure you have read 

and understood all recommendations. 

Failure to observe the following recom-

mendations may result in electric shock, 

cause  fire  and  /  or  serious  injuries.  The  term 

"power tool", used in this manual refers to the 

tools equipped with a power supply cord or a 

battery.
Working space

•

The workstation should be kept tidy and well-lit. 

Disorder at the workstation and inadequate lighting 

may result in accidents.

• Do  not  use  power  tools  in  environment  exposed 

to  the  risk  of  explosion,  e.g.  near  flammable  liquid 

vapours,  gases  or  flammable  particles  in  the  form  of 

dusts. During operation, sparks are generated, which 

may ignite dust or vapours.

•

Do not allow children and unauthorised persons near 

places where operations with the use of an electric tool 

are carried out. Third parties may distract the operator's 

attention, and he may loose control over the tool.

Electric safety recommendations

•

The tool plug should always be inserted to an 

appropriate socket. This reduces the risk of electric 

shock. Do not use plug adapters with grounding 

contacts.

• Avoid touching grounded items, such as metal pipes, 

heaters, cookers and refrigerators. If the worker's body 

comes into contact with a grounded item, the danger of 

electric shock increases.

•

Protect the power tool against rain and moisture. 

Penetration of water into the tool increases the danger 

of electric shock.

•

Do not use the power supply cable for purposes 

other than designed. Under no circumstances should 

one use the cable to carry the tool or pull it; also, it is 

forbidden to switch off the tool by pulling the power 

supply cable. Protect the cable against heating, contact 

with kerosene-based bodies, with sharp edges or 

mobile parts of the tool. A power cable that is damaged 

or spliced increases the danger of electric shock.

• When  working  in  open  air,  use  extension  cords 

designed for this type of work, which will reduce the 

danger of electric shock.

Personal protection recommendations

•

Be cautious when working with power tools, and 

carefully plan your actions. Do not use the tool when 

fatigued,  or  under  the  influence  of  drugs,  alcohol  or 

medicines. Careless handling may result in serious 

injuries.

•

Use personal protection equipment. Always 

wear  protective  goggles.  When  necessary,  use 

respirators, non-slipping boots, hard hats and 

earplugs. The use of personal protection equipment 

is  one  of  the  factors  that  reduce  the  risk  of  injuries.

• Avoid  incidental  activation  of  power  tools.  Before 

inserting the plug, make sure that the power switch is in 

OFF position. When carrying the tool, take your fingers 

off the main switch, which will reduce the possibility of 

incidental activation.

• Before switching on the tool, remove any wrenches 

and other objects from its rotating parts. A wrench left 

in the rotating unit may result in serious injuries.

• Do not apply excessive force, take a stable position 

and always try to keep balance - this will facilitate 

control over the tool.

•

Do not wear loose clothes or freely-hanging 

jewellery.  Hair,  parts  of  garment  and  gloves  should 

be protected against contact with moving parts of the 

power tool.

• If the tool is equipped with a dust collection device, 

make  sure  that  the  device  has  been  activated  and 

used  properly.  Use  of  such  devices  helps  reduce  the 

concentration of dust at the workstation.

Use and handling of power tools

•

The persons with lowered psychophysical or mental 

aptitudes as well as children can not operate the power 

tool, if they are not supervised or instructed about use 

of the power tool by a person responsible for their 

safety.

• Do not overload the tool. Power tools are to be used 

only in operations, to which they have been designed, 

which  will  ensure  safety  and  help  achieve  better 

results.

•

Do not use power tools with a damaged power 

switch. A tool that cannot be switched on and off in a 

controlled manner is potentially dangerous and must 

be repaired immediately.

• Before  adjustment  operations,  replacement  of 

attachments,  and  during  storage,  remove  the  power 

tool plug from the mains socket. This eliminates the 

risk of the tool being unintentionally activated.

•

The tool should be stored out of children's reach. 

Do not allow the use of power tools by persons who 

have  not  read  this  manual  and  are  inexperienced.  In 

the hands of an inexpert person, the tool may be dan

-

gerous both for the operator and his environment.

•

Take proper care of the tool condition. Monitor the 

axial run-out and stability of movable parts' joints, and 

pay proper attention at any faults that may result in the