DEWALT DWD241-QS - Инструкция по эксплуатации - Страница 9

7

English

Protecting the Environment

Separate collection. Products marked with this symbol 
must not be disposed of with normal household waste.
Products contain materials that can be recovered 
or recycled reducing the demand for raw materials. 

Please recycle electrical products according to local provisions. 
Further information is available at 

www.2helpU.com

.

Optional Accessories

WARNING:

 Since accessories, other than those offered 

by 

D

e

WALT

, have not been tested with this product, use 

of such accessories with this tool could be hazardous. 
To reduce the risk of injury, only 

D

e

WALT

 recommended 

accessories should be used with this product.

Consult your dealer for further information on the 
appropriate accessories.

Cleaning

WARNING:

 Blow dirt and dust out of the main housing 

with dry air as often as dirt is seen collecting in and around 
the air vents. Wear approved eye protection and approved 
dust mask when performing this procedure.

WARNING:

 Never use solvents or other harsh chemicals 

for cleaning the non-metallic parts of the tool. These 
chemicals may weaken the materials used in these parts. 
Use a cloth dampened only with water and mild soap. 
Never let any liquid get inside the tool; never immerse any 
part of the tool into a liquid.

Lubrication

Your power tool requires no additional lubrication.

MAINTENANCE

Your power tool has been designed to operate over a long 
period of time with a minimum of maintenance. Continuous 
satisfactory operation depends upon proper tool care and 
regular cleaning.

WARNING:

To reduce the risk of serious personal 

injury, turn tool off and disconnect tool from power 
source before making any adjustments or removing/
installing attachments or accessories. 

An accidental 

start-up can cause injury.

CAUTION:

 If the mixer comes into contact with the 

surface of the mixing container while running, it 
may kickback.

Variable Speed Dial (Fig. A)

WARNING:

 Always switch off the tool when work is 

finished and disconnect the tool from the power source.

The variable speed dial 

 3 

 offers added control and enables the 

mixer to be used at optimum conditions to suit the material.
Turn the dial to the desired level. The higher the speed setting, 
the faster the rotation. 

CAUTION:

 ALWAYS reduce the speed when submerging 

the mixer in the material or lifting it out. Once the mixer is 
fully submerged, increase the speed again to ensure that 
the motor is adequately cooled.