Шуруповерты DENZEL CDL-12-02 26101 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

3
CORDLESS DRILL
EN
PROPER USAGE AND GENERAL INFORMATION
Cordless drill (hereinafter referred to as "machine", "tool") is designed for screwing / unscrewing of different kinds
of screws, drilling into different constructional materials (including metal, wood, plastic, etc.).
The tool is designed for usage at the environment temperature from 0 °С to +40 °С, relative humidity not more
than 80% and absence of direct exposure of atmospheric condensation and excessive air dustiness.
The machine is suitable only for private use and must be used in intermittent duty not more than 20 hours per
month. It is recommended to use on-loading not more than a nominal, for 10-15 minutes and then to have a break
for 20-30 minutes. This usage mode enables to complete domestic tasks effectively and prevents the tool from a
premature coming out of order.
This manual contains the information and the requirements necessary and sufficient for a sure, effective and
secure use of the tool.
Due to constant improving of the tool the manufacture reserves the right to make minor changes in its
construction, not mentioned in this manual and not worsening its consumer and operational properties, effective
and secure use.
COMPLETENESS OF SET
The set contains:
1. Cordless drill
1 pc.
2. Rechargeable battery
2 pc.
3. Charger
1 pc.
4. Instruction manual
1 pc.
5. Warranty card
1 pc.
SPECIFICATIONS
Сharacteristic, unit of measurement
Value
CDL-12-02
Rechargeable battery type
Li-Ion
Battery rated voltage, V
12
Battery Capacity, Ah
1,5
Number of gear speeds
2
Spindle speed, min
-1
0-400/0-1500
Maximum torque, Н*м
15
Battery charging time, H
1
Adjustable torque settings
21+1
Reverse
Yes
Chuck, mm
0,8-10, three-jawed, self-centering,
one-clutch
Spindle lock
Yes
Electronic break
Yes
Maximum drilling diameter in steel, mm
6
Содержание
- 13 СОДЕРЖАНИЕ
- 16 Электробезопасность; Личная безопасность
- 17 Использование электроинструментов и технический уход
- 18 Техническое обслуживание; Остаточные риски
- 19 Устройство машины
- 20 Перед началом эксплуатации машины необходимо:; Установка и снятие батареи.; Зарядка батареи
- 22 Регулировка предельного момента; ШУМ И ВИБРАЦИЯ
- 23 ОБСЛУЖИВАНИЕ; Возможные неисправности; ХРАНЕНИЕ
- 25 сроком на 12 месяцев со дня продажи.; срок гарантии 12 месяцев; срок гарантии 12 месяцев; с возможностью расширенной