Шуруповерты СетеBosch GSR 6-25 TE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
| English
2 609 932 926 | (11.3.15)
Bosch Power Tools
Technical Data
Noise/Vibration Information
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards:
EN 60745-1, EN 60745-2-1, EN 60745-2-2.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen
GERMANY
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
10.12.2014
Assembly
Changing the Tool (see figure A)
Before any work on the machine itself, pull the mains
plug.
Pull off the screwing-depth stop
4
toward the front. Pull out
the screwdriver bit
1
. If required, the universal bit holder
10
can also be pulled off and replaced.
After changing the tool, reattach the screwing-depth stop
4
.
Screwdriver
GSR 6-25 TE
GSR 6-45 TE
GSR 6-60 TE
Article number
3 601 D45 0..
3 601 D45 1..
3 601 D45 2..
Rated power input
W
701
701
701
Output power
W
327
327
327
No-load speed
min
-1
0 – 2 500
0 – 4 500
0 – 6000
Rated speed
min
-1
0 – 1 700
0 – 3 000
0 – 4500
Tool holder
¼" hexagon socket
¼" hexagon socket
¼" hexagon socket
Max. screw dia.
mm
6
6
6
Weight according to EPTA-Procedure 01/2003
kg
1.5
1.4
1.4
Protection class
/
II
/
II
/
II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Sound emission values determined according to EN 60745-2-1.
3 601 ...
D45 0..
D45 1..
D45 2..
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
dB(A)
dB(A)
dB(A)
81
92
3
79
90
3
81
92
3
Vibration total values a
h
(triax vector sum) and uncertainty K determined
according to EN 60745:
Screwdriving without impact:
a
h
K
m/s
2
m/s
2
< 2.5
1.5
< 2.5
1.5
3.3
1.5
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-137-008.book Page 12 Wednesday, March 11, 2015 10:42 AM
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
