СетеBosch GSR 6-25 TE - Инструкция по эксплуатации - Страница 11

 English | 

11

Bosch Power Tools

2 609 932 926 | (11.3.15)

Power tool use and care



Do not force the power tool. Use the correct power tool 
for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it 
on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Screwdrivers



Hold power tool by insulated gripping surfaces, when 
performing an operation where the fastener may con-
tact hidden wiring or its own cord. 

Fasteners contacting 

a “live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.



Hold the machine with a firm grip. 

High reaction torque 

can briefly occur while driving in and loosening screws.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for driving in and loosening screws.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Screwdriver bit *

2

Stop bushing

3

Adjustment sleeve for screwing-depth stop

4

Screwing-depth stop

5

Belt clip

6

Lock-on button for On/Off switch

7

On/Off switch

8

Rotational direction switch

9

Handle (insulated gripping surface)

10

Universal bit holder *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

OBJ_BUCH-137-008.book  Page 11  Wednesday, March 11, 2015  10:42 AM