Bosch UniversalDrill 18 + 2 аккумулятора 0.603.9C8.005 - Инструкция по эксплуатации - Страница 13

English | 

13

Cordless drill/driver

UniversalDrill 18

Max. torque, hard/soft
screwdriving application ac-
cording to ISO 5393

mm

30/18

Max. drilling diameter (first/second gear)

– Steel

mm

10

– Wood

mm

30

Max. screw diameter

mm

8

Tool holder

mm

10

Weight according to 
EPTA-Procedure 01:2014

kg

1.2–1.5 

A)

Permitted ambient temperature

– during charging

°C

0 to +45

– during operation 

B)

°C

-15 to +50

– during storage

°C

-20 to +70

Recommended batteries

PBA 18 V...V-.

PBA 18 V...W-.

Recommended chargers

– PBA 18 V....V-.

AL 22.. CV

AL 1810 CV
AL 1815 CV
AL 1830 CV
AL 1880 CV

– PBA 18 V....W-.

AL 1810 CV
AL 1815 CV
AL 1830 CV
AL 1880 CV

A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/Vibration Information

Noise emission values determined according to

EN 62841-2-1

.

Typically the A-weighted noise level of the power tool is less

than 70 dB(A). Uncertainty K = 5

dB. The noise level when

working can exceed 80 dB(A).

Wear hearing protection

Total vibration values a

h

 (triax vector sum) and uncertainty K

determined according to 

EN 62841-2-1

Drilling in metal: a

h

 = 

1.3

 m/s

2

, K = 

1.5

 m/s

2

.

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.

Assembly

u

Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.

 There is risk of injury

from unintentionally pressing the on/off switch.

Charging the Battery

u

Use only the chargers listed on the accessories page.

Only these chargers are matched to the lithium-ion bat-
tery of your power tool.

Note: 

The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.

u

Do not continue to press the On/Off switch after the
power tool has automatically switched off.

 The battery

can be damaged.

Removing the battery

To remove the battery 

(6)

, press the battery release but-

ton 

(5)

 and pull the battery to the rear and out of the power

tool. 

Do not use force to do this.

Changing the tool (see figure A)

The drill spindle is locked when the on/off switch 

(8)

 is not

pressed. This makes it possible to change the application
tool in the drill chuck quickly, conveniently and easily.
Open the keyless chuck 

(2)

 by turning it in the direction of

rotation 

➊

 until the tool can be inserted. Insert the tool.

Bosch Power Tools

1 609 92A 4XS | (22.02.2019)