Bosch GSB 14,4 VE-2 LI 0.601.9D9.200 - Инструкция по эксплуатации - Страница 10

 English | 

9

Bosch Power Tools

2 6

09 141 061 | (24.6.13)



Use power tools only with specifically designated bat-

tery packs. 

Use of any other battery packs may create a 

risk of injury and fire.



When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and 

Screwdriver

GSB 14,4 VE-2-LI / GSB 18 VE-2-LI



Wear ear protectors when impact drilling. 

Exposure to 

noise can cause hearing loss.

GSR 14,4 VE-2-LI / GSR 18 VE-2-LI / 

GSB 14,4 VE-2-LI / GSB 18 VE-2-LI



Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

or fastener may contact hidden wiring. 

Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give 

the operator an electric shock.



Use auxiliary handle(s), if supplied with the tool. 

Loss 

of control can cause personal injury.



Use appropriate detectors to determine if utility lines 

are hidden in the work area or call the local utility com-

pany for assistance. 

Contact with electric lines can lead to 

fire and electric shock. Damaging a gas line can lead to ex-

plosion. Penetrating a water line causes property damage.



Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that 

can cause kickback. 

The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.



When working with the machine, always hold it firmly 

with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Hold the machine with a firm grip. 

High reaction torque 

can briefly occur while driving in and loosening screws.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Keep your workplace clean. 

Blends of materials are par-

ticularly dangerous. Dust from light alloys can burn or ex-

plode.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 

continuous intense sunlight, fire, water, and 

moisture. 

Danger of explosion.



In case of damage and improper use of the battery, 

vapours may be emitted. Ventilate the area and seek 

medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 

power tool. 

This measure alone protects the battery 

against dangerous overload.



Use only original Bosch batteries with the voltage list-

ed on the nameplate of your power tool. 

When using oth-

er batteries, e. g. imitations, reconditioned batteries or 

other brands, there is danger of injury as well as property 

damage through exploding batteries.

Additional Safety and Working 

Instructions



Dusts from materials such as lead-containing coatings, 

some wood types, minerals and metal can be harmful to 

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer.

 Materials containing 

asbestos may only be worked by specialists.

–

Provide for good ventilation of the working place.

–

It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the 

materials to be worked.



Before any work on the machine (e. g., maintenance, 

tool change, etc.) as well as during transport and stor-

age, set the rotational direction switch to the centre 

position. 

Unintentional actuation of the On/Off switch can 

lead to injuries.



The battery is supplied partially charged. To ensure full 

battery capacity, completely charge the battery in the 

battery charger before using for the first time.



The battery is equipped with a NTC temperature con-

trol which allows charging only within a temperature 

range of between 0 ° C and 45 ° C. A long battery ser-

vice life is achieved in this manner.



Read the operating instructions of the battery charger.



Apply the power tool to the screw only when it is 

switched off. 

Rotating tool inserts can slip off.



Adjust the gear switch only when the machine is at a 

complete stop.



Always push the gear selector and turn the operating 

mode selector switch through to the stop. 

Otherwise, 

the machine can become damaged.



In case of excessive loading, e. g., prolonged blocking 

of the application tool, the electronics switch off the 

power tool. After switching on again, the power tool 

can be used again as intended for. In case of continued 

overload, the power tool will switch off again in order 

to prevent damage to the motor.

OBJ_BUCH-1982-001.book  Page 9  Monday, June 24, 2013  5:22 PM