Bosch GSB 14,4 V-EC (06019E9001) - Инструкция по эксплуатации - Страница 14

14

 | English 

1 609 92A 33A | (30.9.16)

Bosch Power Tools

Safety Warnings for Drills and Screwdrivers

GSB 14,4 V-EC/ GSB 18 V-EC



Wear ear protectors when impact drilling. 

Exposure to 

noise can cause hearing loss.

GSR 14,4 V-EC/ GSR 18 V-EC / 
GSB 14,4 V-EC / GSB 18 V-EC



Hold power tool by insulated gripping surfaces when 
performing an operation where the cutting accessory 
or fastener may contact hidden wiring. 

Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-
posed metal parts of the power tool “live” and could give 
the operator an electric shock.



Use auxiliary handle(s), if supplied with the tool. 

Loss 

of control can cause personal injury.



Use appropriate detectors to determine if utility lines 
are hidden in the work area or call the local utility com-
pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dam-
age.



Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that 
can cause kickback. 

The tool insert jams when:

— the power tool is subject to overload or
— it becomes wedged in the workpiece.



Hold the machine with a firm grip. 

High reaction torque 

can briefly occur while driving in and loosening screws.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.



The battery is supplied partially charged. To ensure full 
battery capacity, completely charge the battery in the 
battery charger before using for the first time.



Read the operating instructions of the battery charger.



Adjust the gear switch only when the machine is at a 
complete stop.



Always push the gear selector and turn the operating 
mode selector switch through to the stop. 

Otherwise, 

the machine can become damaged.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for driving in and loosening screws 
as well as for drilling in wood, metal, ceramics and plastic. 
GSB machines are additionally intended for impact drilling in 
bricks, brickwork and masonry.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Tool holder

2

Keyless chuck

3

Torque presetting ring

4

Mode selector switch  (GSB 14,4 V-EC, GSB 18 V-EC)

5

Gear selector

6

Colour clip

7

Belt clip

8

Battery pack

9

Battery unlocking button

10

Worklight

11

Overload protector indicator

12

Universal bit holder *

13

Rotational direction switch

14

On/Off switch

15

Handle (insulated gripping surface)

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

OBJ_BUCH-2456-002.book  Page 14  Friday, September 30, 2016  11:57 AM