Шуруповерты Black+Decker KR806K - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

4
ENGLISH
Intended use
Your Black & Decker impact drill has been 
designed for drilling in wood, metal, plastics, and 
masonry as well as for screwdriving purposes. 
This tool is intended for consumer use only.
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings and 
all instructions. 
Failure to follow the
warnings and instructions listed below 
may result in electric shock, 
fi
re and/or
serious injury.
Save all warnings and instructions for future 
reference. 
The term “power tool” in the warnings
refers to your mains operated (corded) power tool 
or battery operated (cordless) power tool.
1.
Work area safety
a. Keep work area clean and well lit.
Cluttered
or dark areas invite accidents.
b.
Do not operate power tools in explosive 
atmospheres, such as in the presence of 
fl
ammable liquids, gases or dust.
Power
tools create sparks which may ignite the dust 
or fumes.
c.
Keep children and bystanders away while 
operating a power tool. 
Distractions can
cause you to lose control.
2.
Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do 
not use any adapter plugs with earthed 
(grounded) power tools. 
Unmodi
fi
ed plugs
and matching outlets will reduce risk of 
electric shock.
b.
Avoid body contact with earthed or 
grounded surfaces such as pipes, 
radiators, ranges and refrigerators. 
There
is an increased risk of electric shock if your 
body is earthed or grounded.
c.
Do not expose power tools to rain or wet 
conditions. 
Water entering a power tool will
increase the risk of electric shock.
d.
Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the 
power tool. Keep cord away from heat, oil, 
sharp edges or moving parts. 
Damaged or
entangled cords increase the risk of electric 
shock.
e.
When operating a power tool outdoors, 
use an extension cord suitable for outdoor 
use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f.
If operating a power tool in a damp 
location is unavoidable, use a residual 
current device (RCD) protected supply. 
Use of an RCD reduces the risk of electric 
shock.
3.
Personal safety
a. Stay alert, watch what you are doing
and use common sense when operating 
a power tool. Do not use a power tool 
while you are tired or under the in
fl
uence
of drugs, alcohol or medication.
A moment
of inattention while operating power tools may 
result in serious personal injury.
b.
Use personal protective equipment. 
Always wear eye protection. 
Protective
equipment such as dust mask, non-skid safety 
shoes, hard hat, or hearing protection used 
for appropriate conditions will reduce personal 
injuries.
c.
Prevent unintentional starting. Ensure 
the switch is in the off-position before 
connecting to power source and/or battery 
pack, picking up or carrying the tool. 
Carrying power tools with your
fi
nger on the
switch or energising power tools that have the 
switch on invites accidents.
d.
Remove any adjusting key or wrench 
before turning the power tool on. 
A wrench
or a key left attached to a rotating part of the 
power tool may result in personal injury.
e.
Do not overreach. Keep proper footing 
and balance at all times. 
This enables
better control of the power tool in unexpected 
situations.
f.
Dress properly. Do not wear loose clothing 
or jewellery. Keep your hair, clothing and 
gloves away from moving parts. 
Loose
clothes, jewellery or long hair can be caught in 
moving parts.
g.
If devices are provided for the connection 
of dust extraction and collection facilities, 
ensure these are connected and properly 
used. 
Use of dust collection can reduce dust-
related hazards.
4.
Power tool use and care
a. Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job 
better and safer at the rate for which it was 
designed.

 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
 







