Black+Decker HD555 - Инструкция по эксплуатации - Страница 6

•  To select reverse rotation, push the 

forward/reverse slider to the left.

Warning!

 Never change the direction of 

rotation while the motor is running.

Selecting the drilling mode

•  For drilling in masonry, set the drilling 

mode selector (3) to the     position.

•  For drilling in other materials and for 

screwdriving, set the drilling mode 

selector to the     position.

Setting the drilling depth (Fig. F)

•  Slacken the side handle (7) by turning 

the grip counterclockwise.

•  Set the depth stop (6) to the desired 

position. The maximum drilling depth is 

equal to the distance between the tip of 

the drill bit and the front end of the 

depth stop.

•  Tighten the side handle by turning the 

grip clockwise.

Switching on and off

•  To switch the tool on, press the speed 

switch (1). For tools with variable speed 

switch, the tool speed depends on how 

far you press the switch. As a general 

rule, use low speeds for large diameter 

drill bits and high speeds for smaller 

diameter drill bits.

•  For continuous operation, press the 

lock-on button (2) and release the speed 

switch. This option is available only at full 

speed. This option does not work in 

reverse rotation. Reverse rotation 

available only for HD500.

•  To switch the tool off, release the speed 

switch. To switch the tool off when in 

continuous operation, press the speed 

switch once more and release it.

Maintenance

Keep guards, air vents and the motor 

housing as clear as possible of dust and dirt. 

Wipe with a clean cloth and blow through 

with a low-pressure air supply. Excessive 

build-up of metal dust can cause tracking of 

electrical current from the internal parts to 

exposed metal parts.

Important!

 To assure product SAFETY and 

RELIABILITY, repairs, maintenance and 

adjustment (other than those listed in this 

manual) should be performed by authorized 

service centers or other qualified service 

personnel, always using identical 

replacement parts.

Protecting the environment

Separate collection. This product 

must not be disposed of with normal 

household waste.

Should you find one day that your 

BLACK+DECKER product needs replace-

ment, or if it is of no further use to you, do 

not dispose of it with household waste. Make 

this product available for separate collection.

Separate collection of used products 

and packaging allows materials to be 

recycled and used again. Reuse of 

recycled materials helps prevent environmen-

tal pollution and reduces the demand for raw 

materials.

Local regulations may provide for separate 

collection of electrical products from the 

household, at municipal waste sites or by the 

retailer when you purchase a new product.

BLACK+DECKER provides a facility for the 

collection and recycling of BLACK+DECKER 

products once they have reached the end of 

their working life. To take advantage of this 

service please return your product to any 

authorised repair agent who will collect 

them on our behalf.

You can check the location of your nearest 

authorised repair agent by contacting your 

local BLACK+DECKER office at the address 

indicated in this manual. Alternatively, a list 

of authorised BLACK+DECKER repair agents 

and full details of our after-sales service and 

contacts are available on the Internet at: 

www.2helpU.com.

Accessories

Recommended accessories for use with your 

product are available from your local dealer 

or authorized service center.

6

ENGLISH

(Original instructions)