Black+Decker HD555 - Инструкция по эксплуатации - Страница 4

4

ENGLISH

(Original instructions)

e.  Do not overreach. Keep proper footing 

and balance at all times.

 This enables 

better control of the power tool in 

unexpected situations.

f.  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair, 

clothing and gloves away from moving 

parts.

 Loose clothes, jewellery or long 

hair can be caught in moving parts.

g.  If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these are 

connected and properly used.

 Use of 

dust collection can reduce dust-related 

hazards.

4.  Power tool use and care
a.  Do not force the power tool. Use the 

correct power tool for your application.

The correct power tool will do the job 

better and safer at the rate for which it 

was designed.

b.  Do not use the power tool if the switch 

does not turn it on and off.

 Any power 

tool that cannot be controlled with the 

switch is dangerous and must be 

repaired.

c.  Disconnect the plug from the power 

source and/or the battery pack from the 

power tool before making any 

adjustments, changing accessories, or 

storing power tools.

 Such preventive 

safety measures reduce the risk of 

starting the power tool accidentally.

d.  Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool. 

Power tools are dangerous in the hands 

of untrained users.

e.  Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power 

tools operation. If damaged, have the 

power tool repaired before use.

 Many 

accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind 

and are easier to control.

g.  Use the power tool, accessories and tool 

bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to be 

performed. 

Use of the power tool for 

operations different from those intended 

could result in a hazardous situation. 

5.  Service
a.  Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts.

 This will 

ensure that the safety of the power tool is 

maintained.

6.  Electrical safety

Your tool is double insulated; 

therefore no earth wire is required. 

Always check that the main voltage 

corresponds to the voltage on the 

rating plate.

Warning!

 If the power cord is 

damaged, it must be replaced by the 

manufacturer, authorized 

BLACK+DECKER Service Center or 

an equally qualified person in order 

to avoid damage or injury. If the 

power cord is replaced by an equally 

qualified person, but not authorized 

by BLACK+DECKER, the warranty 

will not be valid.

7.  Labels on tool

The label on your tool may include the 

following symbols along with the date code:

Position of date barcode

The Date Code, which also includes the year

of manufacture, is printed into the housing.

Example:

2017 XX JN

Year of manufacturing

Read

Instructions

Manual

Use Eye

Protection

Use Ear 

Protection

V ........ 

Volts         

A ........

Amperes

Hz .......

Hertz

W ........

  Watts

min .....

minutes

..... 

Alternating 

Current

..... 

Direct 

Current

n

0

  .......

No-Load

Speed

 ...... 

Class II

Construction

.... 

Earthing 

Terminal

.... 

Safety Alert

Symbol

.../min..

Revolutions 

or Recipro-

cation per 

minute