BS18SBL-202C AEG 4935472277 - Инструкция по эксплуатации - Страница 19

19

ENGLISH

Do not dispose of used battery packs in the household refuse or by 

burning them. AEG Distributors o

ff

 er to retrieve old batteries to protect our 

environment.
Do not store the battery pack together with metal objects (short circuit 

risk).
Use only System GBS chargers for charging System GBS battery packs. 

Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry rooms. 

Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load or 

extreme temperatures. In case of contact with battery acid wash it o

ff

immediately with soap and water. In case of eye contact rinse thoroughly 

for at least 10 minutes and immediately seek medical attention.

Warning! 

To reduce the risk of 

fi

 re, personal injury, and product damage 

due to a short circuit, never immerse your tool, battery pack or charger in 

fl

 uid or allow a 

fl

 uid to 

fl

 ow inside them. Corrosive or conductive 

fl

 uids, 

such as seawater, certain industrial chemicals, and bleach or bleach 

containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The battery drill/screwdriver may be used for drilling and screwdriving for 

independent use away from mains supply.
Do not use this product in any other way as stated for normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described under 

“Technical Data” ful

fi

 lls all the relevant regulations and the directives 

2011/65/EU (RoHS), 2014/30/EU, 2006/42/EC, and the following 

harmonized standards have been used: 
EN 62841-1:2015

EN 62841-2-1:2018+A11:2019 

EN 55014-1:2017+A11:2020

EN 55014-2:2015 

EN IEC 63000:2018

Winnenden, 2020-04-19

Alexander Krug

Managing Director 
Authorized to compile the technical 

fi

 le

Techtronic Industries GmbH

Max-Eyth-Straße 10

71364 Winnenden

Germany

BATTERIES

Battery packs which have not been used for some time should be 

recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the 

battery pack. Avoid extended exposure to heat or sunshine (risk of 

overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after 

used. 
To obtain the longest possible battery life remove the battery pack from 

the charger once it is fully charged.
For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 27°C and away 

from moisture

Store the battery packs in a 30% - 50% charged condition

Every six months of storage, charge the pack as normal.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation 

requirements.
Transportation of those batteries has to be done in accordance with local, 

national and international provisions and regulations.
•  The user can transport the batteries by road without further requirements.

•  Commercial transport of Lithium-Ion batteries by third parties is subject to 

Dangerous Goods regulations. Transport preparation and transport are 

exclusively to be carried out by appropriately trained persons and the 

process has to be accompanied by corresponding experts.

When transporting batteries:
•  Ensure that battery contact terminals are protected and insulated to prevent 

short circuit.

•  Ensure that battery pack is secured against movement within packaging.

•  Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice

BATTERY PACK PROTECTION

The battery pack has overload protection that protects it from being 

overloaded and helps to ensure long life.

Under extreme stress the battery electronics switch o

ff

  the machine 

automatically. To restart, switch the machine o

ff

  and then on again. If the 

machine does not start up again, the battery pack may have discharged 

completely. In this case it must be recharged in the battery charger.

MAINTENANCE

Use only AEG accessories and spare parts. Should components need to 

be replaced which have not been described, please contact one of our 

AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the 

machine type printed as well as the six-digit No. on the label and order the 

drawing at your local service agents or directly at: Techtronic Industries 

GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

CAUTION! WARNING! DANGER!

Remove the battery pack before starting any work on the 

machine.

Please read the instructions carefully before starting the 

machine.

Do not dispose electric tools, batteries/rechargeable 

batteries together with household waste material.

Electric tools and batteries that have reached the end of 

their life must be collected separately and returned to an 

environmentally compatible recycling facility.

Check with your local authority or retailer for recycling advice 

and collection point.

n

0

No-load speed

V

Volts

Direct current

European Conformity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

470 409 - BS18SBL.indd   19

470 409 - BS18SBL.indd   19

06.07.2020   10:55:16

06.07.2020   10:55:16