AEG BSB 14G Li-152C 416471 - Инструкция по эксплуатации - Страница 14

12

English

GB

WORKING TIPS

Never use the gear switch whilst the machine is operating. Only use 

the switch when the machine is at a standstill.

BAT TERIES

New battery packs reach full loading capacity after 4 - 5 chargings 

and dischargings. Battery packs which have not been used for some 

time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of 

the battery pack. Avoid extended exposure to heat or sunshine (risk 

of overheating).
The contacts of chargers and battery packs must be kept clean.

MAINTENANCE

Use only AEG accessories and spare parts. Should components need to 

be replaced which have not been described, please contact one of our 

AEG service agents (see our list of guarantee/service addresses). 
If needed, an exploded view of the tool can be ordered. Please state 

the Article No. as well as the machine type printed on the label and 

order the drawing at your local service agents or directly at: AEG Elec-

tric Tools GmbH, Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully before starting 

the machine.

CAUTION! WARNING! DANGER!

Remove the battery pack before starting any work on 

the appliance.

Accessory - Not included in standard equipment, 

available as an accessory.

Do not dispose of electric tools together with 

household waste material! In observance of European 

Directive 2002/96/EC on waste electrical and electronic 

equipment and its implementation in accordance with 

national law, electric tools that have reached the end of 

their life must be collected separately and returned to 

an environmentally compatible recycling facility.

WARNING! Read all safety warnings and all instructions, 

including those given in the accompanying brochure.

 Failure 

to follow the warnings and instructions may result in electric shock, 

fire and/or serious injury.

Save all warnings and instructions for future reference.

SAFET Y INSTRUC TIONS

Wear ear protectors.

 Exposure to noise can cause hearing loss.

Hold power tool by insulated gripping surfaces, when perfor-

ming an operation where the cutting accessory may contact 

hidden wiring or its own cord.

 Cutting accessory contacting a 

„live“ wire may make exposed metal parts of the power tool „live“ 

and could give the operator an electric shock.
Always wear goggles when using the machine. It is recommended to 

wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health. Do 

not inhale the dust. Wear a suitable dust protection mask.
Sawdust and splinters must not be removed while the machine is 

running.
When working in walls ceiling, or floor, take care to avoid electric 

cables and gas or waterpipes.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or 

by burning them. AEG Distributors offer to retrieve old batteries to 

protect our environment.
Do not store the battery pack together with metal objects (short 

circuit risk).
Use only System GBS chargers for charging System GBS battery packs. 

Do not use battery packs from other systems.
No metal parts must be allowed to enter the battery section of the 

charger (short circuit risk).
Never break open battery packs and chargers and store only in dry 

rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load 

or extreme temperatures. In case of contact with battery acid wash 

it off immediately with soap and water. In case of eye contact rinse 

thoroughly for at least 10 minutes and immediately seek medical 

attention.

SPECIFIED CONDITIONS OF USE

BS 12G, BS 14G: The battery drill/screwdriver may be used for drilling 

and screwdriving for independent use away from mains supply.
BSB 12G, BSB 14G: The cordless percussion drill/driver is designed for 

drilling, percussion drilling, as well as screwdriving for independent 

use away from mains supply.
Do not use this product in any other way as stated for normal use.

EC-DECL ARATION OF CONFORMIT Y

We declare under our sole responsibility that this product is in con-

formity with the following standards or standardized documents. EN 

60745, EN 55014-1, EN 55014-2, in accordance with the regulations 

2006/42/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development 

Authorized to compile the technical file

Winnenden, 2011-08-10