Worx WX801.9 - Инструкция по эксплуатации - Страница 16

16

EN

Lock the spindle and assembling metal cutting disc/abrasive 

cutting disc /grinding disc

NOTE: Press and hold the spindle lock button to lock 

the spindle. 

NOTE: Make sure that the metal cutting disc/abrasive 

cutting disc /grinding disc is assembled firmly. 

WARNING! Before any work on the machine itself, 

remove the battery pack. 

See Fig. B

Lock the spindle and removing metal cutting disc/abrasive 

cutting disc /grinding disc 

See Fig. C

Adjusting Wheel Guard for grinding/cutting 

Note: Remove the battery pack before making any 

changes to the tool. For work with grinding or cutting 

discs, the protection guard must be mounted. Use the 

correct type of disc for your application. 

If the power tool is intended to perform any cut-off 

operations, a guard specific for this operation must be 

installed.

See Fig. 

D1,D2,D3

Installing the Battery Pack

WARNING: Before inserting the battery pack, make 

sure that the ON/OFF Switch is in OFF position.

WARNING: When replacing the battery pack, do not 

insert the battery pack until the metal cutting disc/

abrasive cutting disc /grinding disc comes to a complete 

stop!  

See Fig. E

OPERATION

Using On/Off Switch 

Note: Depress the On/Off switch forward to lock-on 

button. Your switch is now locked on for continuous 

use.

See Fig. F

Hand grip areas

See Fig. G

Rough Grinding

WARNING! Never use a cutting disc for rough 

grinding applications. This can cause bodily damaged 

by using the tool for wrong applications. 

See Fig. H

Cutting

See Fig. I