Ryobi R18BS-0 - Инструкция по эксплуатации - Страница 4

particles will be produced. Use the dust collection 
device or connect a dust extraction vacuum during 
use. Wear respiratory protection masks containing 
filters appropriate to the materials being worked. 
Ensure adequate workplace ventilation. Do not 
eat, drink, or smoke in the work area. Only operate 
on materials which are specified in the Intended 
use section. Do not operate on materials (e.g., 
asbestos) which present a health hazard.

Ŷ

Risk of explosion

–

Accumulated fine dust may ignite and cause fire. 
Keep the work area clean and free from dust. Dust 
collection and vacuum extraction systems should 
be regularly and thoroughly cleaned. When sanding 
metal, hot sparks may be produced.

Ŷ

Noise and vibration

–

Wear ear protection when operating the product. 
Do not operate the product for extended periods of 
time.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 

QXPEQHVV DQG EODQFKLQJ RI WKH ¿QJHUV XVXDOO\ DSSDUHQW

upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking, and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

Ŷ

Keep your body warm in cold weather. When operating 
the product wear gloves to keep the hands and wrists 

ZDUP,WLVUHSRUWHGWKDWFROGZHDWKHULVDPDMRUIDFWRU

contributing to Raynaud’s Syndrome.

Ŷ

After each period of operation, exercise to increase 
blood circulation.

Ŷ

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your doctor about 
these symptoms.

 WARNING

,QMXULHVPD\EHFDXVHGRUDJJUDYDWHGE\SURORQJHGXVH

of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

OPERATION

Ŷ

Do not operate the product without a properly tracked 
and fitted belt. An incorrectly tracked belt may come off 

WKHSURGXFWDQGFDXVHSHUVRQDOLQMXU\RUGDPDJHWRWKH

sander.

Ŷ

Secure the workpiece with a vice or clamp to a suitable 
work bench. This helps to prevent the workpiece 

EHFRPLQJDWKURZQREMHFW

Ŷ

Use the supplied handles to hold and control the 
product with both hands.

Ŷ

Do not force the product. Use the correct product for 

\RXU DSSOLFDWLRQ 7KH FRUUHFW SURGXFW ZLOO GR WKH MRE

better and safer at the rate for which it is designed.

Ŷ

Do not apply excessive pressure to the product. Let the 
weight of the product apply the correct pressure and use 
your hands to guide the sander. Excessive pressure will 
overload the product and damage the motor. Applying 
more pressure will not remove more material and will 
reduce sanding efficiency instead.

Ŷ

Change the sanding belt often to maintain the product’s 
ability to effectively remove material.

Ŷ

Start the product using the trigger switch and allow the 
belt to gain correct speed. Then lower the belt onto the 
workpiece. Hold the product securely in both hands 
because the movement of the belt will drive the product 
forwards.

Ŷ

Choose a belt of the correct size and appropriate 
roughness for the task. Use belts with a lower grit 
number for removing more material; higher grit number 
for removing less material and for a finer finish. Replace 
the belt if it becomes damaged, clogged with debris, 
or is worn.

Ŷ

It is normal to sand and move the product back and 
forth along the grain of the material. Sanding across 
the grain will work but it results to a scratched and 
damaged surface.

 WARNING

Dust from certain paints, coatings, and materials may 
cause irritation or allergic reactions to the respiratory 
system. Dust from wood, such as oak, beech, MDF, and 
others are carcinogenic. Materials containing asbestos 

VKRXOG RQO\ EH ZRUNHG RU SURFHVVHG E\ TXDOL¿HG

specialist operators.

Ŷ

Use the dust collector or connect the dust port to a 
vacuum device to reduce risks associated with dust 
particles.

Ŷ

All persons within the work area or nearby should wear 
dust masks which offer appropriate protection.

Ŷ

Always wear safety goggles or safety glasses with side 
shields when operating power tools.

 WARNING

,QMXULHV PD\ EH FDXVHG RU DJJUDYDWHG E\ SURORQJHG

use of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 107.

1. Front handle
2.  Lock on button
3. Main handle

2

| English