Makita GA7050 - Инструкция по эксплуатации - Страница 5

5 

Model GA7050,GA7050R 

Work mode : surface grinding 
Vibration emission (a

h,AG

) : 6.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Work mode : disc sanding 
Vibration emission (a

h,DS

) : 4.0 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Model GA9050,GA9050R 

Work mode : surface grinding 
Vibration emission (a

h,AG

) : 5.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Work mode : disc sanding 
Vibration emission (a

h,DS

) : 2.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

ENG902-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

• 

The declared vibration emission value is used for 
main applications of the power tool. However if the 
power tool is used for other applications, the 
vibration emission value may be different. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Angle Grinder 
Model No./ Type: GA7050, GA7050R, GA9050, 
GA9050R 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

26.6.2009

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB033-4 

GRINDER SAFETY WARNINGS 

Safety Warnings Common for Grinding, Sanding, 
Wire Brushing, or Abrasive Cutting-Off Operations: 

1. 

This power tool is intended to function as a 
grinder, sander, wire brush or cut-off tool. 
Read all safety warnings, instructions, 
illustrations and specifications provided with 
this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire 
and/or serious injury. 

2. 

Operations such as polishing are not 
recommended to be performed with this 
power tool.

 Operations for which the power tool 

was not designed may create a hazard and cause 
personal injury.   

3. 

Do not use accessories which are not 
specifically designed and recommended by 
the tool manufacturer.

 Just because the 

accessory can be attached to your power tool, it 
does not assure safe operation. 

4. 

The rated speed of the accessory must be at 
least equal to the maximum speed marked on 
the power tool.

 Accessories running faster than 

their rated speed can break and fly apart. 

5. 

The outside diameter and the thickness of 
your accessory must be within the capacity 
rating of your power tool.

 Incorrectly sized 

accessories cannot be adequately guarded or 
controlled.