Makita BO6050J - Инструкция по эксплуатации - Страница 8

8

ENGLISH

OPERATION

CAUTION:

Only use Makita genuine abrasive 

discs and pads for sander (optional accessories).

CAUTION:

Never switch on the tool when it 

is in contact with the workpiece, it may cause an 

injury to operator.

CAUTION:

Make sure the work material is 

secured and not unstable. Falling object may 

cause personal injury.

CAUTION:

Hold the tool firmly with one hand 

on the switch handle and the other hand on the 

front grip (or side handle) when performing the 

tool.

NOTICE:

Be careful not to press down the shaft 

lock button.

 It may shorten tool life.

NOTICE:

Never force the tool. 

Excessive pressure 

may decrease the sanding / polishing efficiency, dam

-

age the abrasive disc / pad or shorten tool life.

Sanding operation

NOTICE:

Never run the tool without the abrasive 

disc. You may seriously damage the pad.

Hold the tool firmly. Turn the tool on and wait until it 

attains full speed. Then gently place the tool on the 

workpiece surface. Keep the pad flush with the work

-

piece and apply slight pressure on the tool.

Polishing operation

Optional accessory

NOTICE:

Continuous operation at high speed 

may damage work surface.

1.

Applying wax

Use the sponge pad. Apply wax to the sponge pad or 

work surface. Run the tool at low speed to smooth out 

wax.

NOTE:

 First, wax a not conspicuous portion of the 

work surface to make sure that the tool will not 

scratch the surface or result in uneven waxing.

2.

Removing wax

Use the felt pad. Run the tool to remove wax.

3.

 Polishing

Apply the wool pad gently to the work surface.

MAINTENANCE

CAUTION:

Always be sure that the tool is 

switched off and unplugged before attempting to 

perform inspection or maintenance.

NOTICE:

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.

• 

Hook-and-loop type abrasive discs (with pre-

punched holes)

• 

Hook-and-loop type sponge pad