Bosch PSM 160 A - Инструкция по эксплуатации - Страница 8

8

 | English 

2 609 005 062 | (22.6.12)

Bosch Power Tools

f

Keep children and bystanders away while operating a 

power tool. 

Distractions can cause you to lose control.

Electrical safety

f

Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs with 

earthed (grounded) power tools. 

Unmodified plugs and 

matching outlets will reduce risk of electric shock.

f

Avoid body contact with earthed or grounded surfaces, 

such as pipes, radiators, ranges and refrigerators. 

There is an increased risk of electric shock if your body is 

earthed or grounded.

f

Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of electric 

shock.

f

Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 

from heat, oil, sharp edges and moving parts. 

Damaged 

or entangled cords increase the risk of electric shock.

f

When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. 

Use of a cord suitable 

for outdoor use reduces the risk of electric shock.

f

If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected 

supply. 

Use of an RCD reduces the risk of electric shock.

Personal safety

f

Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication. 

A moment of inattention while op-

erating power tools may result in serious personal injury.

f

Use personal protective equipment. Always wear eye 

protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal inju-

ries.

f

Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source 

and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or en-

ergising power tools that have the switch on invites acci-

dents.

f

Remove any adjusting key or wrench before turning 

the power tool on. 

A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

f

Do not overreach. Keep proper footing and balance at 

all times. 

This enables better control of the power tool in 

unexpected situations.

f

Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from 

moving parts. 

Loose clothes, jewellery or long hair can be 

caught in moving parts.

f

If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. 

Use of dust collection can re-

duce dust-related hazards.

Power tool use and care

f

Do not force the power tool. Use the correct power tool 

for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.

f

Do not use the power tool if the switch does not turn it 

on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.

f

Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.

f

Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.

f

Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation. If 

damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 

tools.

f

Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 

and are easier to control.

f

Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account 

the working conditions and the work to be performed. 

Use of the power tool for operations different from those 

intended could result in a hazardous situation.

Battery tool use and care

f

Recharge only with the charger specified by the manu-

facturer. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another bat-

tery pack.

f

Use power tools only with specifically designated bat-

tery packs. 

Use of any other battery packs may create a 

risk of injury and fire.

f

When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails, 

screws or other small metal objects, that can make a 

connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.

f

Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.

Service

f

Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

OBJ_BUCH-1338-003.book  Page 8  Friday, June 22, 2012  8:01 AM