Шлифмашины Bosch PSM 160 A - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
| English
2 609 005 062 | (22.6.12)
Bosch Power Tools
Delivery Scope
Cordless Drill/Driver.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
Technical Data
The technical data of the machine are listed in the table on
page 67.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
29.05.2012
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 67.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
Wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Drilling
Low speed
High speed
Switching On
Switching Off
U
Rated voltage
n
0
1
No-load speed (1. gear)
n
0
2
No-load speed (2. gear)
M
Maximum torque according to ISO 5393
Metal
Wood
Ø
Drilling diameter, max.
Ø
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
L
wA
Sound power level
L
pA
Sound pressure level
K
Uncertainty
a
h
Vibration total value
Symbol
Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1338-003.book Page 10 Friday, June 22, 2012 8:01 AM
