Bosch GEX 125-1 AE (0601387501) - Инструкция по эксплуатации - Страница 14

14

 | English 

1 609 92A 0ZY | (27.11.14)

Bosch Power Tools

Noise/Vibration Information

Sound emission values determined according to 
EN 60745-2-4.

Typically the A-weighted sound pressure level of the product 
is 77 dB(A). Uncertainty K = 2.8 dB.
The noise level when working can exceed 80 dB(A).

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745:
a

h

= 5.0 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 
may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working 
period.

Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU, 
2006/42/EC including their amendments and complies with 
the following standards: EN 60745-1, EN 60745-2-4.

Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 27.11.2014

Assembly



Before any work on the machine itself, pull the mains plug.

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

Material

Application

Grain size

– Paint
– Varnish
– Filling compound
– Filler

For sanding off paint

coarse

40
60

For sanding primer (e. g., for removing brush dashes, 
drops of paint and paint run)

medium

80

100
120

For final sanding of primers before coating

fine

180
240
320
400

Expert for Wood

– All wooden materials (e. g., 

hardwood, softwood, chip-
board, building board)

Best for Wood

– Hardwood
– Particle  Board
– Building  board
– Metal  materials

For coarse-sanding, e. g. of rough, unplaned beams and 
boards

coarse

40
60

For face sanding and planing small irregularities

medium

80

100
120

For finish and fine sanding of wood

fine

180
240
320
400

OBJ_BUCH-315-005.book  Page 14  Thursday, November 27, 2014  9:23 AM