Bosch GEX 125-1 AE (0601387501) - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

1 609 92A 0ZY | (27.11.14)

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Sander



Use the machine only for dry sanding. 

Penetration of wa-

ter into the machine increases the risk of an electric shock.



Pay attention that no persons are put at risk through 
sparking. Remove any combustible materials in the vi-
cinity. 

Sparking occurs when sanding metal materials.



Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the 
dust collector before taking breaks. 

In unfavourable 

conditions, e. g., when sparks emit from sanding metals, 
sanding debris in the dust bag, micro filter or paper sack 
(or in the filter sack or filter of the vacuum cleaner) can 
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when 
the sanding debris is hot after long periods of working.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for dry sanding of wood, plastic, 
metal, filler as well as coated surfaces.
Machines with electronic control are also suitable for polish-
ing.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

On/Off switch

2

Thumbwheel for orbit frequency preselection  
(GEX 125-1 AE)

3

Dust box, complete (Microfilter System)

4

Handle (insulated gripping surface)

5

Sanding plate

6

Sanding sheet *

7

Screws for sanding plate

8

Extraction outlet

9

Filter element (Microfilter System)

10

Vacuum hose *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Technical Data

Random Orbital Sander

GEX 125-1 A

GEX 125-1 AE

Article number

3 601 C87 0..

3 601 C87 5..

Preselection of orbital stroke rate

–



Rated power input

W

250

250

No-load speed n

0

min

-1

12 000

7 500 – 12 000

No-load orbital stroke rate

min

-1

24 000

15 000 – 24 000

Orbit diameter

mm

2.5

2.5

Sanding plate diameter

mm

125

125

Weight according to EPTA-Procedure 01/2003

kg

1.3

1.3

Protection class

/

II

/

II

The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

OBJ_BUCH-315-005.book  Page 13  Thursday, November 27, 2014  9:23 AM