AEG WS 2200-230 DMS - Инструкция по эксплуатации - Страница 14

10

English

b)  Operations such as polishing are not recommended 

to be performed with this power tool. 

Operations for which 

the power tool was not designed may create a hazard and cause 

personal injury.

c)  Do not use accessories which are not specifically 

designed and recommended by the tool manufacturer.

 Just 

because the accessory can be attached to your power tool, it does 

not assure safe operation.

d)  The rated speed of the accessory must be at least equal 

to the maximum speed marked on the power tool. 

Accesso-

ries running faster than their rated speed can break and fly apart.

e)  The outside diameter and the thickness of your 

accessory must be within the capacity rating of your power 

tool. 

Incorrectly sized accessories cannot be adequately guarded 

or controlled.

WARNING!

Read all safety warnings and all instructions.

 Failure to 

follow the warnings and instructions may result in electric shock, 

fire and/or serious injury. 

Save all warnings and instructions for future reference.

  ANGLE GRINDER SAFET Y WARNINGS

Safety Warnings Common for Grinding, Sanding, Wire 

Brushing or Abrasive Cutting-Off Operations:
a)  This power tool is intended to function as a grinder, 

sander, wire brush or cut-off tool. Read all safety warnings, 

instructions, illustrations and specifications provided with 

this power tool. 

Failure to follow all instructions listed below may 

result in electric shock, fire and/or serious injury.

TECHNICAL DATA Angle Grinder

WS 2200-180

WS 2200-230

Production code

4284 91 03 ...

... 000001-999999

4285 01 03 ... 

4601 51 01... 

... 000001-999999

Rated input

2200 W

2200 W

Rated speed

8500 min

-1

6600 min

-1

D= Grinding disk diameter max. 

d= Grinding disk hole diameter

180 mm
22,2 mm

230 mm
22,2 mm

b= Cutting disk thickness min. / max.

1,5 / 3 mm

1,9 / 3 mm

b= Grinding disk thickness max.

6 mm

6 mm

D= Grinding surface diameter max.

180 mm

230 mm

D= Wiring brush diameter max.

100 mm

100 mm

Thread of work spindle

M 14

M 14

Weight according EPTA-Procedure 01/2003

5,7 kg

5,8 kg

Noise information 

Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))

94,3 dB(A)

94,3 dB(A)

Sound power level (Uncertainty K=3dB(A))

Wear ear protectors!

105,3 dB(A)

105,3 dB(A)

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 60745

Surface grinding: Vibration emission value a

h,SG

Uncertainty K=

8,5 m/s

2 

1,5 m/s

2

7,6 m/s

2 

1,5 m/s

2

Disk sanding: Vibration emission value a

h,DS

Uncertainty K=

15,9 m/s

2 

1,5 m/s

2

15,9 m/s

2 

1,5 m/s

2

WARNING!

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 

and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. 

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, 

with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over 

the total working period. 

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is 

running but not actually doing the job. This may significantly reduce the exposure level over the total working period. 

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, 

keep the hands warm, organisation of work patterns.

GB