Sonos (INWLLWW1) - Инструкция по эксплуатации - Страница 4

4

TWO (2) YEAR WARRANTY

User License and Warranty Agreement (EULA). A summary of the conditions of the SONOS Warranty is set out below. In the event that there is any c

onflict 

between this summary and the EULA, the EULA will control. Your local consumer protection laws may provide additional rules on warranty. The SONOS 
Warranty does not in any way restrict the rights that you may have under such rules. The SONOS Warranty covers defects in materials and workmanship 
in every SONOS product for two (2) years from the date of shipment from SONOS or the date of the original retail purchase from an Authorised SONOS 
Dealer. The SONOS warranty does not guarantee that SONOS products will at all times operate without interruption or will be error-free, or that all errors 
may be corrected. If you have a valid claim under the SONOS Warranty and have returned the product in accordance with the procedure set out below, we 
will repair or replace the defective product free of cost. If we determine that the problem is not covered under the SONOS Warranty, we will notify you and 
inform you of service or replacement alternatives that are available to you for an additional fee. The warranty period is not extended if we repair or replace 
your product.
Your SONOS Warranty is transferable with ownership, so if you give or sell the SONOS product to someone during the guarantee period, it’s still covered.
There are some exclusions to the SONOS Warranty, including but not limited to: problems that result from external causes such as accident, abuse or 
misuse;
Use that is not in accordance with SONOS’ product instructions; products with missing or altered serial numbers; products which have had their housings 
opened or are otherwise tampered with; or problems caused by using third party accessories, parts, or components.

© 2018 SONOS Inc. All rights reserved. 

Use of the Works with Apple badge means that an accessory has been designed to w

ork specifically with the 

t

echnology identified in the badge and has 

been c

ertified 

by the developer to meet Apple performance standards. 

Apple is a trademark of Apple Inc., registered in the U.S. and other countries.

Before You Begin

SONOS by Sonance In-Wall and In-Ceiling speaker grilles 
completely cover the exposed speaker frame, so only the grilles 
(not the speakers themselves) require painting.

IMPORTANT: IF THE WALL OR CEILING WILL BE PAINTED AFTER THE SPEAKERS ARE INSTALLED, THE 
SPEAKER FLANGE AND BAFFLE MUST BE MASKED BEFORE PAINTING THE WALL OR CEILING.

      Figure 8

Grille Painting Instructions

Preparing The Grille For Painting

Carefully remove the scrim cloth from the underside of the grille.
The scrim cloth is held in place with a light tacking glue. Use a
heating agent such as a heat gun or hair dryer to soften the glue
and carefully remove the cloth, since you will need to replace it
when you’re done painting the grille. Be careful not to deform

to properly replace the cloth on the grille. Remove any adhesive
residue from the back of the grille before beginning painting

Painting The Grille

1. Prime the grille with a metal primer/bonder in a spray can.
  Carefully follow the manufacturer’s directions on the can.

2. We recommend using water-based latex paint on the grilles.
  Thin the paint with a proper thinning agent to a ratio of 1:1
  paint-to-thinner, and strain it through a standard mesh strainer
  to remove any lumps.

IMPORTANT: DUE TO ITS INCREASED DURABILITY, OIL-BASED PAINT SHOULD BE CONSIDERED FOR VP 
EXTREME SERIES SPEAKERS THAT ARE INSTALLED OUTDOORS.

3. Use a small touch-up gun or cap-spray gun with a #3 tip
  for painting.

  (A) Set the nozzle with a medium to wide fan

  (B) Set the pressure regulator to 60psi

  (C) Lightly spray the front of the grille in 3 quick strokes
       from approximately 10 inches away

  (D) Let the paint set for a minute, then turn the grille 90º
       and lightly spray the grille again in 3 quick strokes.
       Repeat this step until all four sides of the grille have
       been evenly painted evenly.

4. While the paint is still wet, inspect the grille and make
  sure that excess paint has not collected underneath the grille
  frame, and that none of the grille perforations ar

e filled with

  paint. If any are, use compressed air to blow the paint out of
  the perforations.

IMPORTANT: IF YOU FIND ANY GRILLE PERFORATIONS THAT ARE PLUGGED WITH PAINT AFTER THE PAINT 
HAS DRIED, USE A STRAIGHT PIN OR SEWING NEEDLE TO CAREFULLY REMOVE THE PAINT.

5. Once the paint has thoroughly dried, replace the scrim cloth
  on the back of the grille and mount the grille on the speaker.

03.25.20