Worx WG894E.9 - Инструкция по эксплуатации - Страница 6

6

Cordless Li-Ion handy saw                     

EN

4. POWER TOOL USE AND CARE 

a)  Do not force the power tool. Use 

the correct power tool for your 

application. 

The correct power tool will 

do the job better and safer at the rate for 
which it was designed. 

b)  Do not use the power tool if the 

switch does not turn it on and off. 

Any power tool that cannot be controlled 
with the switch is dangerous and must be 
repaired.

c)  Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, 

or storing power tools. 

Such preventive 

safety measures reduce the risk of starting 
the power tool accidentally. 

d)  Store idle power tools out of the 

reach of children and do not allow 

persons unfamiliar with the power 

tool or these instructions to operate 

the power tool. 

Power tools are 

dangerous in the hands of untrained users. 

e)  Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power 

tool’s operation. 

If damaged, have the 

power tool repaired before use. Many 
accidents are caused by poorly maintained 
power tools. 

f)   Keep cutting tools sharp and clean.

Properly maintained cutting tools with 
sharp cutting edges are less likely to bind 
and are easier to control. 

g) Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to 

be performed.

 Use of the power tool for 

operations different from those intended 
could result in a hazardous situation. 

5.  BATTERY TOOL USE AND CARE

a)  Recharge only with the charger 

specified by the manufacturer. 

A 

charger that is suitable for one type of 
battery pack may create a risk of fire when 
used with another battery pack.

b)  Use power tools only with specifically 

designated battery packs.

 Use of any 

other battery packs may create a risk of 
injury and fire.

c)  When battery pack is not in use, keep 

it away from other metal objects, like 

paper clips, coins, keys, nails, screws 

or other small metal objects, that can 

make a connection from one terminal 

to another.

 Shorting the battery terminals 

together may cause burns or a fire.

d)  Under abusive conditions, liquid 

may be ejected from the battery; 

avoid contact. If contact accidentally 

occurs, flush with water. If liquid 

contacts eyes, additionally seek 

medical help.

 Liquid ejected from the 

battery may cause irritation or burns.

6. SERVICE

a)  Have your power tool serviced by 

a qualified repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 
maintained.

RECIPROCATING SAW 

SAFETY WARNINGS

1.  Hold reciprocating saw by insulated 

gripping surfaces, when performing 

an operation where the cutting 

accessory may contact hidden wiring.

Cutting accessory contacting a “live” 
wire may make exposed metal parts of 
the power tool “live” and could give the 
operator an electric shock.

ADDITIONAL 

SAFETY RULES FOR 

RECIPROCATING SAW

1.  Always wear a dust mask.