Worx WG894E.9 - Инструкция по эксплуатации - Страница 12

12

Cordless Li-Ion handy saw                     

EN

reaches full operating speed.

HOW TO GRASP YOUR WORX HANDY SAW

Grasp your WORX Handy saw as shown in Fig 
E, for best control of the tool and comfortable 
use as a reciprocating saw.

GENERAL CUTTING (See Fig. F1, F2)

NOTE:

1.   Always use a blade suited to the material 

and material thickness to be cut. The quality 
of cut will improve as the number of blade 
teeth increase. 

2.  Always ensure the workpiece is firmly held 

or clamped to prevent movement. Support 
large panels close to the cut line. Any 
movement of the material may affect the 
quality of the cut. 

3.  The blade cuts on the upward stroke and 

may chip the uppermost surface or edges 
of your work piece when cutting, ensure 
your uppermost surface is a non-visible 
surface when your work is finished.

OPERATION:

1.   Mark the line of cut, clearly before your 

cutting.

2.  Do not force the tool. Place the steel base 

(9) firmly on the workpiece while cutting. 
Use only enough steady pressure on the 
blade to keep the saw cutting.

3.  Reduce the pressure as the blade comes to 

the end of the cut.

4.  Allow the saw to come to a complete stop 

when before removing the blade from the 
workpiece.

TREE TRIMMING

Use wood blade when cutting tree branches. 
Hold steel base firmly against tree brance. 
Cut close to the branch of the tree to decrease 
movement of the branch being cut.

METAL CUTTING

Use a finer tooth blade for ferrous metals and 
a coarse tooth blade for non-ferrous metals. 
When cutting thin sheet metals always clamp 
steel on both sides of the sheet to reduce 
vibration or tearing of the sheet metal. Do not 
force the cutting blade when cutting thin metal 

or sheet steel as they are harder materials and 
will take longer to cut. Excessive blade force 
may reduce the life of the blade or damage 
the motor. To reduce heat during metal cutting, 
add a little lubricant along the cutting line.

MAINTENANCE

Remove the battery pack from the tool 

before carrying out any adjustment, 

servicing or maintenance.

Your tool requires no additional lubrication or 
maintenance. 
There are no user serviceable parts in your 
tool. Never use water or chemical cleaners to 
clean your tool. Wipe clean with a dry cloth. 
Always store your tool in a dry place. Keep the 
motor ventilation slots clean. Keep all working 
controls free of dust. 

ENVIRONMENTAL 

PROTECTION

Waste electrical products must not be 
disposed of with household waste. 
Please recycle where facilities exist. 

Check with your local authorities or retailer for 
recycling advice.