Skil 4900 LG - Инструкция по эксплуатации - Страница 7

7

Power tools are dangerous in the hands of untrained 

users.

e) 

maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f) 

keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc., in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5) SERVICE

a) 

Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR RECIPROCATING SAWS

ACCESSORIES

•  SKIL can assure flawless functioning of the tool only 

when original accessories are used

•  Use only accessories with an allowable speed matching 

at least the highest no-load speed of the tool

BEFORE USE

•  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the tool

•  Avoid damage that can be caused by screws, nails and 

other elements in your workpiece; remove them before 

you start working

ElECTRICAl SAFETY

•  Use completely unrolled and safe extension cords with a 

capacity of 16 Amps (U.K. 13 Amps)

• 

Hold tool by insulated gripping surfaces when 

performing an operation where the cutting tool may 

contact hidden wiring or its own cord

 (contact with a 

“live” wire will also make exposed metal parts of the tool 

“live” and shock the operator)

• 

Use suitable detectors to find hidden utility lines or 

call the local utility company for assistance

 (contact 

with electric lines can lead to fire or electrical shock; 

damaging a gas line can result in an explosion; 

penetrating a water pipe will cause property damage or 

an electrical shock)

PERSONAl SAFETY

•  In case of electrical or mechanical malfunction, 

immediately switch off the tool and disconnect the plug

•  This tool should not be used by people under the age of 

16 years

• 

Do not work materials containing asbestos

 (asbestos 

is considered carcinogenic)

•  Dust from material such as paint containing lead, some 

wood species, minerals and metal may be harmful 

(contact with or inhalation of the dust may cause allergic 

reactions and/or respiratory diseases to the operator or 

bystanders); 

wear a dust mask and work with a dust 

extraction device when connectable

•  Certain kinds of dust are classified as carcinogenic (such 

as oak and beech dust) especially in conjunction with 

additives for wood conditioning; 

wear a dust mask and 

work with a dust extraction device when 

connectable

•  Follow the dust-related national requirements for the 

materials you want to work with

• 

keep hands away from cutting area and the blade; 

keep your second hand on barrel grip H 

2

 (if both 

hands are holding the saw, they can not be cut by the 

blade)

• 

Do not reach underneath the workpiece

 (the proximity 

of the blade to your hand is hidden from your sight)

• 

Never hold piece being cut in your hands or across 

your leg

 (it is important to support the work properly to 

minimise body exposure, blade binding, or loss of control)

• 

Use clamps or other equipment to secure and 

support the workpiece

 (holding the workpiece in your 

hand or against your body may lead to loss of control)

• 

Do not use a dull or damaged blade

 (bent blades can 

break easily or cause kickback)

• 

keep hands away from between the tool housing 

and blade clamp D 

2

 (the blade clamp can pinch your 

fingers)

• 

Ensure that blade clamp D 

2

 is tight before making a 

cut (a loose clamp may cause the tool or blade to slip 

with loss of control as a result)

• 

Use protective gloves when removing the blade 

from the tool

 (the saw blade may be hot after prolonged 

use)

•  Wear protective glasses and hearing protection

EXPlANATION OF SYmBOlS ON TOOl

3

 Read the instruction manual before use

4

 Double insulation (no earth wire required)

5

 Do not dispose of the tool together with household waste 

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

•  Do not connect the blue (= neutral) or brown (= live) wire 

in the cord of this tool to the earth terminal of the plug

•  If for any reason the old plug is cut off the cord of this tool, 

it must be disposed of safely and not left unattended

USE

•  On/off 

6

•  Speed control

With wheel C 

2

 the sawing speed can be adjusted from 

low to high (6 positions)

•  Adjusting sawing speed to material used 

7

!  if the tool does not run with wheel C 

2

 in position 

1, select a higher sawing speed and lower the 

sawing speed while the tool runs

•  Mounting saw blade 

8

!  disconnect the plug

-  press blade clamp D forward and hold it in that 

position

-  insert blade (with teeth facing down or up) to full depth

-  release blade clamp D

-  pull out blade somewhat until clamp D clicks into a 

square position

-  push in and pull out blade to check whether it is locked 

correctly

!  ensure that blade clamp D 

2

 is tight before 

making a cut (a loose clamp may cause the tool 

or blade to slip with loss of control as a result)