Metabo SSE 1100 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

Original Instructions

We, being solely responsible: Hereby declare that 

these sabre saws, identified by type and serial 

number *1), meet all relevant requirements of 

directives *2) and standards *3). Technical 

documents for *4) - see page 3.

The sabre saw is suitable for sawing wood, metals, 

plastics or similar materials such as hard rubber, 

fibre glass, etc.
Warranty claims apply only to a limited extent for 

applications with excessive wear (e.g. pallet 

construction/repair).
The user bears sole responsibility for any damage 

caused by inappropriate use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your power tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 

shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 

documents.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring.

 Contact with a live lead can also energise 

metallic objects 

and lead to electric shock.
Pull the plug out of the socket before making any 

adjustments, converting or servicing the machine.
Always wear protective goggles, gloves, and sturdy 

shoes when working with this tool.

Wear ear protectors when working for long 

periods of time.

 High noise levels over a 

prolonged period of time may affect your hearing.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).

Use only sharp, undamaged saw blades. Do not 

use saw blades that are cracked or that have 

changed their shape.
Always position the power cable so that it leads 

away from the back of the machine.
Always hold the machine with both hands on the 

intended handles, take a secure stance and 

concentrate on the work.
Always work with the guide attached.
When sawing, the guide must make secure contact 

with the workpiece.
When sawing water pipes, ensure that they do not 

contain any water. 
Do not try to saw extremely small workpieces.
Clamp workpiece properly e.g. using clamping 

fixtures. Under no circumstances should you hold 

the workpiece with your hand or foot. 
Keep hands well away from the sawing area and the 

saw blade. Do not reach underneath the workpiece.
Danger of injury due to the sharp saw blade.
Do not touch the moving saw blade! 

Remove chips and similar material only with the 

machine at a standstill.
After stopping work, the saw blade may still be hot. 

Wear protective gloves.
Avoid inadvertent starts: always switch the tool off 

when the plug is removed from the mains socket or 

if there has been a power cut. 
LED lights (6): Do not observe the LED radiation 

directly with optical instruments.

Reducing dust exposure:

Some of the particles generated using this 

power tool may contain substances known to 

cause cancer, allergic reactions, respiratory 

diseases, birth defects or other reproductive harm. 

Some of these substances include: Lead (in paint 

containing lead), mineral dust (from bricks, 

concrete etc.), additives used for wood treatment 

(chromate, wood preservatives), some wood types 

(such as oak or beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

Do the following to reduce exposure to these 

substances: Ensure good ventilation of the 

workplace and wear appropriate protective 

equipment, such as respirators able to filter 

microscopically small particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 

particles enter the environment in an uncontrolled 

manner. 

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions