Metabo PowerMaxx SSE 12 BL - Инструкция по эксплуатации - Страница 10

ENGLISH

en

10

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to 

cause cancer, birth defects or other reproductive 

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and 

other masonry products, and

- Arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well 

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits,

- use an extraction unit and/or air purifiers,

- ensure good ventilation of the workplace and keep 

clean using a vacuum cleaner. Sweeping or 

blowing stirs up dust.

- Vacuum or wash the protective clothing. Do not 

blow, beat or brush.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws 

related to the carriage of hazardous goods (UN 

3480 and UN 3481). Inform yourself of the currently 

valid specifications when shipping li-ion battery 

packs. If necessary, consult your freight forwarder. 

Certified packaging is available from Metabo. 
- Only send the battery pack if the housing is intact 

and no fluid is leaking. Remove the battery pack 

from the machine for sending. Prevent the 

contacts from short-circuiting (e.g. by protecting 

them with adhesive tape).

See page 2.

1 Saw blade tensioning device for jigsaw and 

reciprocating saw blades

2 LED working light

3 Front handle

4 Switch-on lock: To lock the trigger (10) to 

prevent the tool from switching on inadvertently.

5 Rear handle

6 Battery pack release button 

7 Battery pack *

8 Capacity indicator button *

9 Capacity and signal indicator *

10 Trigger 

11 Button for setting the guide

12 Guide 

13 Saw blade

* depending on equipment/not in scope of delivery

6.1 The machine's multifunctional monitoring 

system

If the machine switches off automatically, the 

machine electronics have activated automatic 

protection mode.

Causes and remedies:

1.

Battery pack almost flat

 (the electronics 

prevent the battery pack from discharging totally 

and avoid irreparable damage).
If the battery pack is almost flat, it must be 

recharged.

2. Long continuous overloading of the machine will 

activate the 

temperature cut-out

.

Leave the machine or battery pack to cool. 
Note: The machine will cool more quickly if you 

operate it at idling speed.

3. If the 

current is too high 

(for example, if the 

machine seizes continuously for long periods), 

the machine switches off.
Switch off the machine at the trigger (10). Then 

continue working as normal. Try to prevent the 

machine from seizing.

6.2 Battery pack

Charge the battery pack (7) before use.
Recharge the battery pack if performance 

diminishes.
Instructions on charging the battery pack can be 

found in the operating instructions of the Metabo 

charger.
In case of Li-Ion battery packs with capacity and 

signal display (9) (equipment-specific):

- Press the button (8), the LEDs indicate the charge 

level.

- The battery pack is almost flat and must be 

recharged if one LED is flashing.

5. Overview

6. Use