Makita DSD180Z - Инструкция по эксплуатации - Страница 5

5 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

DSD180

Length of stroke

6 mm

Strokes per minute

0 - 6,000 min

-1

Maximum cutting capacities

Drywall

30 mm

Wood

15 mm

Rated voltage

D.C. 18 V

Standard battery cartridges

BL1815N, BL1820, BL1820B

BL1830, BL1830B, BL1840, 

BL1840B, BL1850, BL1850B, 

BL1860B

Overall length

258 mm

263 mm

Net weight

1.7 kg

1.9 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications and battery cartridge may differ from country to country.

• 

Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Intended use

This tool is intended for plunge-cutting of a drywall. 

Wood can also be cut by installing a suitable saw blade.

Noise

The typical A-weighted noise level determined accord

-

ing to EN60745-2-11:

Sound pressure level (L

pA

) : 79 dB(A)

Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).

WARNING:

Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN60745-2-11:

Work mode: cutting drywall (thickness 30 mm)

Vibration emission (a

h

) : 2.5 m/s

2

Uncertainty (K) : 1.5 m/s

2

Work mode: cutting chip board (thickness 15 mm)

Vibration emission (a

h

) : 5.0 m/s

2

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration emission value has 

been measured in accordance with the standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared vibration emission value 

may also be used in a preliminary assessment of 

exposure.

WARNING:

 The vibration emission during actual 

use of the power tool can differ from the declared 

emission value depending on the ways in which the 

tool is used.

WARNING:

 Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking 

account of all parts of the operating cycle such as 

the times when the tool is switched off and when it is 

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EU declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.