Bosch 0.601.6A5.002 - Инструкция по эксплуатации - Страница 16

16

 | English

Switch on the power tool and guide it towards the workpiece
you wish to work on. Place the base plate 

(2)

 on the surface

of the workpiece and saw through the material applying even
pressure and feed. Switch the power tool off once you have
finished your work.
Switch the power tool off immediately if the saw blade jams.
Widen the sawing gap slightly with a suitable tool and pull
the power tool out.

Plunge cutting (see figure F)

u

Plunge cuts may only be applied to soft materials,
such as wood, gypsum board, etc. Do not plunge cut
metal materials.

For plunge cutting, use only short saw blades.
Place the power tool so that the edge of the base plate 

(2)

rests on the workpiece, without the saw blade 

(1)

 touching

the workpiece, and switch it on. When using power tools
with stroke rate control, select the maximum stroke rate.
Press the power tool firmly against the workpiece and allow
the saw blade to plunge slowly into the workpiece.
As soon as the base plate 

(2)

 rests fully on the workpiece,

continue sawing along the required cutting line.
For particular jobs, the saw blade 

(1)

 can also be fitted after

being turned 180° in order to operate the power tool the
other way around.

Flush sawing (see figure G)

Protruding components such as water pipes, for example,
can be cut directly at the wall using elastic bi-metal saw
blades.

u

Ensure that the saw blade is always longer than the
diameter of the workpiece. There is a risk of kickback.

Place the saw blade directly against the wall and bend it
slightly by applying lateral pressure to the power tool until
the base plate is flush with the wall. Switch on the power tool
and saw through the workpiece applying consistent lateral
pressure.

Coolant/lubricant

As the material heats up along the cutting line when cutting
metal, you should apply coolant or lubricant.

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to
50 °C. Do not leave the battery in your car in the summer, for
example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.

Maintenance and Service

Maintenance and Cleaning

u

Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-
moved for transport and storage.

 There is risk of injury

from unintentionally pressing the on/off switch.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

Carefully clean the saw blade receptacle with a soft cloth. To
do so, remove the saw blade from the power tool. Keep the
saw blade receptacle operational using suitable lubricants.
If the power tool becomes very dirty, this can lead to serious
faults. For this reason, do not cut materials which generate
large quantities of dust from below or overhead.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 
Unit 23 Magna Drive 
Magna Business Park 
City West 
Dublin 24 
Tel. Service: (01) 4666700 
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd. 
Power Tools 
Locked Bag 66 
Clayton South VIC 3169 
Customer Contact Center 
Inside Australia: 
Phone: (01300) 307044 
Fax: (01300) 307045
Inside New Zealand: 
Phone: (0800) 543353 
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 

1 609 92A 4TC | (02.04.2019)

Bosch Power Tools