Роботы-пылесосы VITEK VT-1802 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

12
ENGLISH
№ Malfunction
Possible causes
Solution
5
The vacuum cleaner
doesn‘t respond to
the remote control.
The vacuum cleaner is switched off
or the vacuum cleaner battery is
discharged.
Make sure that the battery is fully
charged and the vacuum cleaner
is switched on.
The signal from the remote control
is not transmitted, because the
infrared emitter on the remote
control or the infrared receiver on
the vacuum cleaner are dirty.
Wipe the infrared emitter on the
remote control and the infrared
receiver on the vacuum cleaner
bumper.
There are other sources of infrared
signals in the room that affect the
operation of the vacuum cleaner.
Do not use other remote controls
during the vacuum cleaner
operation.
The distance from the remote
control is more than 5 meters.
Bring the remote control closer
to the vacuum cleaner.
Notes:
- before applying to the service center try to restart the vacuum cleaner, switch it off by
pressing and holding the start/stop button (1) «
» and then switch the vacuum cleaner on again.
If the problem is not solved, contact the service center.
DELIVERY SET
Robotic vacuum cleaner – 1 pc.
Charging station – 1 pc.
Power adapter – 1 pc.
Side brushes – 3 pcs. (one spare)
Remote control – 1 pc.
Dry cleaning attachment – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Vacuum cleaner:
Power supply: 14.4 V, Rechargeable battery:
Li-Ion 14,4 V 2200 mAh
Battery charging time: up to 5 hours
Operation time: up to 2 hours
Power: 30 W
Dust bin capacity: 0.7 l
Noise level: 65 dB
Power adapter:
Power supply: 100-240 V ~50/60 Hz 0.5 A
Output voltage: 20 V
500 мA
Charging station:
Input voltage: 20 V
500 mA
Output voltage: 20 V
500 mA
Remote control:
CR2025 battery, 3 V
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-1802.indd 12
14.06.2019 15:07:07
Содержание
- 14 Устройство содержит литиевый; ПЕРЕД ПЕРВЫМ ИСПОЛЬЗОВАНИЕМ; Сохраните заводскую упаковку.
- 15 ПУЛЬТ ДИСТАНЦИОННОГО УПРАВЛЕНИЯ; СБОРК А ПЫЛЕСОСА
- 16 ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПЫЛЕСОСА
- 17 ИСПОЛЬЗОВАНИЕ ПЫЛЕСОСА; » будет мигать; » на пульте дистанционного управления,
- 19 » на пульте дистанционного управ-; Планирование уборки помещения; - в режиме планирования; ЧИСТК А И УХОД
- 22 No Неисправность
- 23 Приблизьте пульт ДУ к пылесосу.
- 24 RUS