VITEK VT-1802 - Инструкция по эксплуатации - Страница 10

10

 ENGLISH

 •

Clean  the  front  wheel  (6)  from  dust  and  gar-
bage and wipe it. Remove hair, if there are any, 
make sure that nothing hinders the wheel (6) 
free rotation.

 •

Clean  the  contact  points  for  battery  charg-
ing  (9) on the vacuum cleaner and the contact 
points on the charging station (17) from dust.

 •

Clean  and  wipe  the  anti-drop  sensors  (4)  on 
the bottom part on the vacuum cleaner body.

 •

Wipe the vacuum cleaner body with a slightly 
damp cloth and then wipe it dry.

 •

Do not immerse the vacuum cleaner body, the 
power  adapter  (15)  and  the  connecting  cord 
of  the  power  adapter  (15)  into  water  or  any 
other liquids. Provide that no liquid gets inside 
the vacuum cleaner body.

 •

Do  not  use  solvents  or  abrasives  for  clean-
ing  the  vacuum  cleaner  body  and  the  power 
adapter (15).

STORAGE

 •

Before  taking  the  vacuum  cleaned  away  for 
long  term  storage  clean  its  body,  the  dust 
compartment (10) and the HEPA filter (11).

 •

Remove the battery from the remote control.

 •

Use the original package for storage.

 •

Keep the vacuum cleaner in a dry cool place 
out  of  reach  of  children  and  disabled  per-
sons.

 
TABLE OF LIGHT AND SOUND SIGNALS  
OF THE VACUUM CLEANER

Light signals

Vacuum cleaner 
state

Color indication

Battery charging 
mode

Flashing purple 

Battery charging 
is finished

Blue 

Ready mode

Flashing blue 

Malfunction

Flashing red

Low battery

Flashing red

Sound signals

Number of 
sound signals

Malfunction

Solution

1

•

The vacuum cleaner got stuck

Move the vacuum cleaner to a free place.

2

••

Dust bin is malfunctioning

Remove the dust bin and install it again.

3

•••

The driving wheel or the side 
brushes are damaged.

If they don‘t rotate, contact the service 
center.

4

••••

Anti-drop sensor is malfunctioning. Clean the sensors from dust.

IM VT-1802.indd   10

14.06.2019   15:07:07