Sencor SRV9550BK - Инструкция по эксплуатации - Страница 3

12/2020

- 3 -

 Copyright © 2020, Fast ČR, a.s.

Laser

The laser sensor meets the laser safety class according to 

standard EN 60825-1.

■

When using, handling or performing maintenance tasks on the 

robotic vacuum cleaner with a laser sensor, always adhere to the 

following instructions:

  -   Prior to any handling, turn off the robotic vacuum cleaner using 

the power button.

  -  Do not point the laser beam at people.

  -  Do not look into the direct or reflected beam of the laser.

  -   Modifications or repairs of the laser sensor not performed by an 

authorised service centre are forbidden.

Warning:

Not following the instructions contained in this 

user‘s manual may result in dangerous irradiation!

Electrical safety

■

Before connecting the adapter to a power socket check that the 

technical details on the rating label match the electrical voltage 

in the socket.

■

Connect the power adapter only to a properly grounded power 

socket. Do not use an extension cord.

■

Do not disconnect the power adapter from the power socket by 

pulling on the power cord. This could damage the power adapter 

or the power socket. Disconnect the power adapter from the 

power socket by pulling on the plug.

■

Do not place the power cord of the power adapter over sharp 

objects. Make sure that the power cord does not hang over the 

edge of a table and that it is not touching a heated or hot surface.