Ecovacs Deebot Ozmo 950 (DX9G) - Инструкция по эксплуатации - Страница 25

25

EN

6. Troubleshooting

No.

Malfunction

Possible Causes

Solutions

5

DEEBOT does not clean 

automatically at the scheduled 

time.

Time Scheduling function is cancelled.

Program DEEBOT to clean at specific times using the 

ECOVACS App.

The Continued Cleaning function is turned 

ON and DEEBOT has just finished cleaning 

the scheduled cleaning area.

This is normal. No solution necessary.

DEEBOT is switched OFF.

Switch ON DEEBOT.

The robot’s battery is low.

Keep DEEBOT switched ON and connected to the 

Docking Station to make sure it has a full battery to work 

at any time.

The robot’s Suction Intake is blocked and/or 

there is debris stuck in its components.

Power OFF DEEBOT, clean the Dust Bin and invert the 

robot. Clean the robot’s Suction Intake, Side Brushes and 

the Main Brush as described in section 4.

6

DEEBOT does not clean the 

whole area.

The cleaning area is not tidy.

Remove small objects from the floor and tidy up the 

cleaning area before DEEBOT starts cleaning.

7

The water is not coming out of 

the Reservoir when DEEBOT is 

mopping.

The water inlet filter on the bottom of 

Reservoir is clogged.

Unscrew the water inlet on the bottom of Reservoir and 

clean the filter.

The Reservoir runs out of water.

Add water into the Reservoir.

The water outlets on the bottom of DEEBOT 

are clogged.

Check the water outlets on the bottom and clean.