Ecovacs Deebot Ozmo 950 (DX9G) - Инструкция по эксплуатации - Страница 24

24

EN

No.

Malfunction

Possible Causes

Solutions

1

DEEBOT is not charging.

DEEBOT is not switched ON.

Switch ON DEEBOT.

DEEBOT has not connected to the Docking 

Station.

Be sure that the robot’s Charging Contacts have 

connected to the Docking Station Pins.

The Power Cord is not connected to the 

Docking Station.

Make sure the Power Cord is firmly connected to the 

Docking Station.

The battery is completely discharged.

Re-activate the battery.  Switch ON. Place DEEBOT on 

the Docking Station by hand, remove after charging for 3 

minutes, repeat 3 times; then charge normally.

Make sure the Docking Station is connected 

to the power supply.

The Docking Station is not connected to the power 

supply.

2

DEEBOT cannot return to the 

Docking Station.

The Docking Station is not correctly placed.

Refer to section 3.2 to correctly place the Docking 

Station.

3

DEEBOT gets stuck while 

working and stops.

DEEBOT is tangled with something on the floor 

(electrical wires, curtains, carpet fringing, etc.).

DEEBOT will try various ways to free itself.  If it is 

unsuccessful, manually remove the obstacles and restart.

4

DEEBOT returns to the 

Docking Station before it has 

finished cleaning.

When the battery gets low, DEEBOT 

automatically switches to Return to Charger 

Mode and returns to the Docking Station to 

recharge itself.

This is normal. No solution necessary.

Working time varies according to floor 

surface, room complexity and the Cleaning 

Mode selected.

This is normal. No solution necessary.

6. Troubleshooting