DREAME Bot W10 White (RLS5C) - Инструкция по эксплуатации - Страница 25

21

EN

Problem

Solution

The robot will not turn on.

The battery is low. Recharge the robot on the base and try again.

The ambient temperature is too low (below 0° C) or too high (above 40° C). The operating temperature of the 

robot is 0° C to 40° C.

The robot will not charge.

The base is unplugged. Make sure that both ends of the power cord are plugged in.

Poor contact. Wipe the charging contacts of the base and robot.

The robot will not return to the 

base.

There are obstructions around the base. Place the base in a more open area.

Wipe the signaling area of the base.

Moving the robot may cause it to re-position itself or re-map its surroundings. If the robot is too far from the 

base, it might not be able to automatically return to the base, in which case you need to manually place the 

robot onto the base.

The robot is malfunctioning.

Turn off the robot and then restart it.

The robot is making a strange 

noise.

The main brush, side brush, or main wheels may be entangled with hair or debris. Turn off the robot and 

remove any hair or debris. 

The suction power is weak while 

cleaning.

The dust bin is full. Empty the dust bin.

The filter is clogged. Clean the filter. 

The main brush is entangled with hair or debris. Remove the hair and debris tangled around the main brush.

FAQ