DREAME Bot W10 White (RLS5C) - Инструкция по эксплуатации - Страница 14

10

EN

1. Remove the protective strips

2. Install the side brush

Preparations Before Use

Note:

 Install the side brush until it clicks into place.

3. Place the base against the wall and charge the robot

Note:

·

Remove any objects that are closer than 1.5 m from the front and 0.5 m from either  

side of the base.

·

Make sure that no objects might block the signaling area.

·

To prevent water stains from wetting wood floors or carpets, the self-wash base is 

recommended to be placed on tile floors or marble floors.

>1.5m

>0.5m

>0.5m

Within the Best 

Wi-Fi Range

·

Install the base in as open a location as possible with a good Wi-Fi signal.

·

Insert the power cord into the base and plug it into the socket.

·

Place the robot onto the base, and the robot will trun on automatically and 

start charging.

·

It is recommended to fully charge the robot before the first use. After the 

robot is fully charged, the status indicator illuminates white for 10 minutes 

and then lights down.

Click