DREAME Bot W10 White (RLS5C) - Инструкция по эксплуатации - Страница 16

12

EN

Fast Mapping

How to Use

Do not attach the mop pad. Place the robot on the base, and the robot turns 

on automatically. 

The first time you use the robot, build a map as instructed on the app. Then, 

the robot moves around to scan the environment and builds a map without 

cleaning. After the robot returns to the base, a map is built and saved 

automatically.

Start Cleaning

Pause/Sleep

Note:

·

The robot will turn off automatically if it is left in the sleep mode for more than 12 

hours.

·

If the robot is paused and placed onto the base, the current cleaning process will 

end.

Note:

·

Make sure that the robot is fully charged before using it. Do not manually move 

the robot when it is cleaning.

·

If the battery gets low while cleaning, the robot returns to the base and resumes 

cleaning after charging its battery. The Resume Cleaning function must be 

enabled on the app in advance.

Turn On/Off

Cleaning Mode

Spot Cleaning

After the robot is turned on, it cleans each room by cleaning along the 

edges and walls first and then cleaning in an S-shaped pattern. The robot 

automatically returns to the base to charge its battery after cleaning.

Press and hold the   button for 3 seconds to turn on the robot. Once the 

power indicator is permanently on, the robot is on standby. To turn off the 

robot, press and hold the

button for 3 seconds when the robot is not 

moving.

Press briefly the   and   buttons on the base, and the robot starts cleaning.

When the robot is cleaning, press briefly any buttons on the robot or the

button on the base to pause the robot.

If the robot pauses for more than 10 minutes, it automatically enters the sleep 

mode, and the power indicator and charging indicator stop glowing. Press 

any buttons on the robot or base, or tap on the app to wake up the robot.

When the robot is paused or on standby, press and hold the

button for 3 

seconds to enable the spot cleaning mode. In this mode, the robot cleans a 

square-shaped area of 1.5 × 1.5 meters around it and returns to its starting 

point once the spot cleaning is completed.

Additional App Functions

A map must be built before using the preceding functions.

Follow the instructions on the app to use more functions.

The app software is upgrading, and the actual app user interface may be 

different from the statements in this manual. Please follow the instructions 

based on the current app version.